气动隔膜泵不需灌引水，吸程高达5m，产品扬程可以达到70米左右，出口压力≥7kgf/cm2; 流动宽敞，通过性能好，允许通过*颗粒直径达10mm。抽送泥浆、杂质时，对泵磨损甚微; 扬程、流量可通过气阀开度实现无级调节（气压调节在1-7kgf/cm2之间）; 该气动隔膜泵无旋转部件，没有轴封，隔膜将抽送的介质与泵的运动部件、工作介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时，不会造成环境污染和危害人身安全; 不必用电，在易燃、易爆场所使用安全可靠; 可以浸没在介质中工作;
使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机，气动不锈钢隔膜泵也不会因此而损坏，不旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又有自动启动运行; 结构简单、易损件少，该气动不锈钢隔膜泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降; 可输送较粘的液体（粘度在1万厘泊以下）; 本泵无须用油润滑，即使空转，对气动不锈钢隔膜泵也无任何影响。
Germany Kaysen imported pneumatic diaphragm pump overview
The pneumatic diaphragm pump is currently the most innovative type of pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. For various corrosive liquids, liquid with particles, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastics and stainless steel. NBR, neoprene, fluororubber, and polytetrafluoroethylene are used according to different liquid media. To meet the needs of different users.
The pneumatic diaphragm pump does not need to be irrigated, the suction stroke is up to 5m, the product lift can reach 70 meters, the outlet pressure is ≥7kgf/cm2; the flow is spacious, the pass performance is good, and the maximum particle diameter is allowed to reach 10mm. When the mud and impurities are pumped, the pump wears little; the lift and flow can be adjusted steplessly by the valve opening (the air pressure is adjusted between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium does not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and harm to personal safety; it does not need electricity, it is safe and reliable to use in flammable and explosive places; it can be submerged in the medium;
Easy to use, reliable in operation, easy to open and close, only need to open and close the gas valve, even if there is no medium running or sudden stop due to unexpected circumstances, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will not be overloaded. Automatic stop, self-protection performance, when the load returns to normal, there is automatic start-up operation; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the medium conveyed by the pump will not be in contact Valves, linkages and other moving parts, unlike other types of pumps, the performance of the rotor, pistons, gears, blades and other components wear down gradually; can transport a more viscous liquid (viscosity below 10,000 centipoise); The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pneumatic stainless steel diaphragm pump.
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.