进口氟塑料化工泵(进口化工泵10 )

进口氟塑料化工泵(进口化工泵10 )

产品介绍:

进口氟塑料化工泵(进口化工泵) KAYSEN凯森进口氟塑料化工泵概述: 进口氟塑料泵广泛广泛适用于:化工、制酸、制碱、冶炼、稀土、农药、染料、医药、造纸、电镀、酸洗...


  • 物品单位:
  • 品牌: 德国KAYSEN
  • 货号: KS001589

产品详细说明

品牌 德国KAYSEN
货号 KS001589
用途 可以泵吸各种强酸和强碱以及腐蚀性液体介质; 针对各种剧毒、有害以及挥发性液体都能泵
型号 KAYSEN
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质

进口氟塑料化工泵(进口化工泵)


KAYSEN凯森进口氟塑料化工泵概述:
进口氟塑料泵广泛广泛适用于:化工、制酸、制碱、冶炼、稀土、农药、染料、医药、造纸、电镀、酸洗、无线电、化成箔等行业输送酸、碱、有机溶剂、强氧化剂等腐蚀性介质。 适用温度:-20°C至120°C。
氟塑料泵是化工泵系列中以制造用材分类的一种泵,氟塑料泵按其结构可以分为以下几类:一、氟塑料离心泵;二、氟塑料液下泵;三、氟塑料磁力泵;四、氟塑料自吸泵;五、氟塑料管道泵;六氟塑料砂浆泵;七、钢衬氟塑料泵等。


主要特点:
目前业内生产的内衬氟塑料型耐腐蚀泵(大型泵)如:氟塑料驱动大型磁力泵内衬材、氟塑料离心泵、氟塑料自吸泵及衬氟钢管等质均为聚全氟代乙丙烯(FEP,简称F46)内衬F46泵及具有优良的耐腐蚀性和良好的刚性,并能耐冲击、耐振动和耐扭曲,已广泛地应用在石油、化工工业中输送腐蚀性液体和气体。
氟塑料泵可在下列条件下使用:温度-80℃~+160℃,压力≤16公斤/厘米2,真空范围(瞬时,常温)400mmHg柱。在使用过程中,显出了它特有的性能。应用及效益例举如下:
(1)使用性能和耐腐蚀性能优于酚醛胶泥、搪瓷制品,衬玻璃制品和不锈钢等材料。尤其是使用在强氧化剂存在的场合,使用寿命较上述材料可提高一至数倍,特别指出,它们能经受醚类介质的渗透腐蚀。
(2)能经得起各种腐蚀介质的考验。在已使用过程的介质中,有溴、苯、甲醛、盐酸、盐酸盐、50%硫酸、12%NaSCN、HSCN、异丙醚、22%NaOH、氯苯水,对苯磺酸、99.5%氯气、95~90%叔丁基次氯酸盐、0.51%游离氯、11~12%氯丙醇水溶液(PH=2~3)、氯丙醇、氯丙酮BB一二氯异丙醚、二氯丙烷、 苯、次氯酸、CCL4等。
(3)在各种腐蚀性介质同时存在的情况下,即使160℃左右也可使用。例如,666氯化液中含有苯( )、次氯酸、盐酸等各种腐蚀介质,既有强有机溶剂,又有强的氧化性介质,还有强酸等,除F46,F4以外,难找到一种合适的材料能同时耐这些介质交替或同时腐蚀。
目前业内生产的全氟(氟塑料合金)型耐腐蚀泵(小型泵)如:CQB氟塑料驱动小型磁力泵,FSB氟塑料离心泵等及其他泵叶轮等配件所用材质均为中国上海中科院专利材料--氟塑料合金(F4与F46及少量添加剂按一定比例混合加工而成)。
氟塑料合金具有无可比拟的耐腐蚀性和机械强度耐冲击、耐振动、耐扭曲及无毒素分解。


Germany  Kaysen Fluoroplastic Chemical Pump Overview:

Fluoroplastic pumps are widely used in: chemical, acid, alkali, smelting, rare earth, pesticide, dye, medicine, paper, electroplating, pickling, radio, chemical foil and other industries to transport acid, alkali, organic solvents, strong oxidants, etc. Corrosive medium. Applicable temperature: -20 ° C to 120 ° C.

Fluoroplastic pump is a kind of pump which is classified into manufacturing materials in chemical pump series. Fluoroplastic pump can be divided into the following categories according to its structure: 1. Fluorine plastic centrifugal pump; 2. Fluoroplastic liquid lower pump; 3. Fluorine plastic magnetic force Pump; four, fluorine plastic self-priming pump; five, fluoroplastic pipeline pump; hexafluoroplastic mortar pump; seven, steel-lined fluoroplastic pump.


main feature:

At present, the industry-lined fluoroplastic type corrosion-resistant pump (large pump) such as: fluoroplastic drive large magnetic pump lining material, fluorine plastic centrifugal pump, fluorine plastic self-priming pump and lining fluorine steel pipe are all polyfluorinated Ethylene propylene (FEP, F46 for short) lining F46 pump has excellent corrosion resistance and good rigidity, and can withstand impact, vibration and distortion. It has been widely used in petroleum and chemical industries to transport corrosive liquids and gases. .

The fluoroplastic pump can be used under the following conditions: temperature -80 ° C ~ +160 ° C, pressure ≤ 16 kg / cm 2 , vacuum range (instantaneous, normal temperature) 400 mm Hg column. In the course of its use, it shows its unique performance. Examples of applications and benefits are as follows:

(1) The use performance and corrosion resistance are superior to phenolic cement, enamel products, lining glass products and stainless steel. Especially in the presence of strong oxidizing agents, the service life can be increased by one to several times compared with the above materials, in particular, they can withstand the osmotic corrosion of ether media.

(2) It can withstand the test of various corrosive media. In the medium used, there are bromine, benzene, formaldehyde, hydrochloric acid, hydrochloride, 50% sulfuric acid, 12% NaSCN, HSCN, diisopropyl ether, 22% NaOH, chlorobenzene water, p-benzenesulfonic acid, 99.5%. Chlorine, 95~90% t-butyl hypochlorite, 0.51% free chlorine, 11~12% chloropropanol aqueous solution (pH=2~3), chloropropanol, chloroacetone BB-dichloroisopropyl ether, two Chloropropane, benzene, hypochlorous acid, CCL4, etc.

(3) In the case where various corrosive media are present at the same time, it can be used even at around 160 °C. For example, 666 chlorinated solution contains various corrosive media such as benzene ( ), hypochlorous acid, hydrochloric acid, etc., including strong organic solvents, strong oxidizing media, and strong acid, except F46 and F4. It is difficult to find a suitable material that can withstand alternating or simultaneous corrosion of these media.

At present, the perfluoro (fluoroplastic alloy) type corrosion-resistant pump (small pump) produced in the industry, such as: CQB fluoroplastic drive small magnetic pump, FSB fluoroplastic centrifugal pump, and other pump impellers and other accessories are made of materials. -- Fluoroplastic alloy (F4 and F46 and a small amount of additives are mixed in a certain proportion).

Fluoroplastic alloys have unmatched corrosion resistance and mechanical strength, impact resistance, vibration resistance, distortion resistance and no toxin decomposition.

位于Schw?bischGmünd的凯森Kaysen泵业有限公司是*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持 各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。
凯森始终坚持“重质量,讲信誉”为宗旨。产品现 全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

进口氟塑料化工泵(进口化工泵)