进口立式排污泵-进口排污泵-德国KAYSEN泵业

进口立式排污泵-进口排污泵-德国KAYSEN泵业

产品介绍:

立式排污泵-排污泵-KAYSEN泵业GERMANY KAYSEN PUMP CO .,LTD立式排污泵安装方便,用途广泛即可作一般管道泵为高层建筑加压送水之用,又可输送含有颗粒纤维污水,除适用输送污水外,还适用于作疏水泵,过滤冲洗冷凝循...


  • 物品单位:
  • 品牌: 德国KAYSEN
  • 货号: KS5819569

产品详细说明

货号 KS5819569
品牌 KAYSEN
用途 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。
型号 KAYSEN
工作压差 0
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质

立式排污泵-排污泵-KAYSEN泵业

GERMANY KAYSEN PUMP CO .,LTD


立式排污泵安装方便,用途广泛即可作一般管道泵为高层建筑加压送水之用,又可输送含有颗粒纤维污水,除适用输送污水外,还适用于作疏水泵,过滤冲洗冷凝循环泵等。
立式排污泵是应用凯森先进技术的基础上,结合国内水泵的使用特点而研制成功的新一代泵类产品,具有节能效果显著、防缠绕、无堵塞、自动安装和自动控制等特点。在排送固体颗粒和长纤维垃圾方面,具有独特效果。
该系列排污泵采用独特叶轮结构和新型机械密封,能有效地输送含有固体物和长纤维。叶轮与传统叶轮相比,该泵叶轮采用单流道或双流道形式,它类似于一截面大小相同的弯管,具有非常好的过流性,配以合理的蜗室,使得该泵具有效率高、叶轮经动静平衡试验,使泵在运行中无振动。


主要特点:

高效节能
耐腐蚀性
强度高
加工方便
占地面积小
寿命长

 

主要应用:

NL型多用液下泵系单级单吸离心泵,使用于矿山,造纸、印染、环保、石墨、云母、黄金、陶瓷、炼油、石油、化工、农场、盐场、碘场、染化、酿酒、食品、化 肥、焦化、选厂、建筑、大理石厂、金矿、泥浆、流沙、泥塘、污塘、污浊液送吸浓稠液、装料及悬浮物质的污水作业,也可作矿排水及含有泥块的流体。

若与高压水泵,水枪配合,组成水力机械化土方工程机组,就可用作于土地平整,河道与池塘的疏浚、凿开等小型水利工程的挖方与输方,以及城市的防空工程,地下工程。

养鱼用作带水清塘、鱼池增氧等。

污水泵使用须知:
1、使用电源必须是三相四线制,若无接地线,必须加装,以防漏电。工作时,须在就近装有与电机相符的电路熔断器和幵关,以防叶轮杂物卡死时烧坏电机。
2、本污水泵使用时可不必安装任何基础装置即能运转,只要斜靠牢固即可,必要时用绳索系牢以防意外。起动后必须检查电机旋转方向,不得反转超过一分钟。
3、当被吸送的液体中含有较多的杂草、铁丝、木条、砖块等杂物时,必须事先尽量清除掉、并可采取加放铁丝篮等方法,防止杂物吸入泵内造成叶轮打坏,卡死和管道阻塞等事故。
4、泵体在吸泥及其他污浊物后应给予短期吸水,以便冲洗泵体及管道内部。
5、在露天工作时,电机应装护罩,以防雨水等浸入电机。
6、在河底,池底吸泥宜吊挂在三脚架上,并可搁在浮筒或船上移动作业,在进行土方工程作业时,高压水冲碎的土块直径不得大于吸入口三分之一。
7、本泵规定的转速是泵的*转速,不得任意提高;减低转速使用不限,但功效显著降低。
8、本污水提升泵在吸送厚泥,浓稠液体或高扬程,长距离输送泥浆时,负荷降低,但不能用改变结构的方法来增大负荷。
9、一般运转1250小时左右,进行泵的定期保养,拆卸泵座查看轴承,和泵的密封情况,清洗并更换黄油,必要时更换油封,轴套和其他零件。保养及更换零件的注意事项请见安装。〈采用机械密封运泵转3500小时左右进行定期保养)。
10、当长期停止使用时,应将蜗壳拆幵,擦干零件并在相对运动接合表面涂以簿油,存放在干燥地方以备以后使用。


The imported vertical sewage pump is easy to install and can be used as a general pipeline pump for pressurized water supply of high-rise buildings. It can also transport sewage containing granular fiber. In addition to transporting sewage, it is also suitable for use as a drainage pump, filtration and flushing condensation cycle. Pumps, etc.

The vertical sewage pump is a new generation of pump products developed on the basis of the advanced technology of Kaisen and combined with the use characteristics of domestic water pumps. It has the characteristics of remarkable energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long-fiber waste.

This series of sewage pumps uses a unique impeller structure and a new mechanical seal to efficiently transport solids and long fibers. Compared with the conventional impeller, the impeller is in the form of a single flow channel or a double flow channel. It is similar to a curved pipe of the same cross-section. It has very good over-flow and is equipped with a reasonable volute to make the pump efficient. High and impeller dynamic and static balance test, so that the pump has no vibration during operation.



main feature:


●High efficiency and energy saving

●Corrosion resistance

●High intensity

● Easy processing

● Small footprint

●Long life


 


main application:


●NL type multi-purpose submerged pump is a single-stage single-suction centrifugal pump used in mining, paper making, printing and dyeing, environmental protection, graphite, mica, gold, ceramics, oil refining, petroleum, chemical, farm, salt field, iodine field, dyeing, wine making , food, fertilizer, coking, plant selection, construction, marble plant, gold mine, mud, quicksand, mud pond, sewage pond, sewage liquid to send thick liquid, loading and suspended materials sewage operation, can also be used for mine drainage and contain The fluid of the mud block.


●If combined with high-pressure water pump and water gun to form a hydro-mechanized earth-moving engineering unit, it can be used for land leveling, excavation and transportation of small water conservancy projects such as dredging and ponding of rivers and ponds, as well as urban air defense works and underground works. .


● Fish farming is used to bring water to clear ponds and fish ponds to increase oxygen.



Sewage pump use instructions:

1. The power supply must be three-phase four-wire system. If there is no grounding wire, it must be installed to prevent leakage. When working, the circuit fuses and switches that match the motor must be installed nearby to prevent the motor from being burnt out when the impeller is stuck.

2. The sewage pump can be operated without any basic equipment when it is used. As long as it is leaning firmly, it can be fastened with a rope to prevent accidents if necessary. The direction of motor rotation must be checked after starting and must not be reversed for more than one minute.

3. When the liquid to be sucked contains more weeds, iron wire, wood strips, bricks and other debris, it must be removed as much as possible beforehand, and a wire basket can be added to prevent the debris from being sucked into the pump. Caused the impeller to be broken, stuck and blocked.

4. The pump body should be given short-term water absorption after sucking mud and other dirty materials, so as to flush the inside of the pump body and the pipeline.

5. When working in the open air, the motor should be equipped with a shield to prevent rainwater from entering the motor.

6. At the bottom of the river, the suction at the bottom of the pool should be hung on a tripod and can be moved on a pontoon or on a ship. When doing earthwork, the diameter of the clods crushed by high-pressure water should not exceed one-third of the suction port. .

7. The rated speed of the pump is the maximum speed of the pump, and it must not be arbitrarily increased; the use of the reduced speed is not limited, but the effect is significantly reduced.

8. When the sewage lifting pump sucks thick mud, thick liquid or high lift, and the slurry is transported for a long distance, the load is reduced, but the method of changing the structure cannot be used to increase the load.

9. Normal operation for about 1250 hours, carry out regular maintenance of the pump, disassemble the pump seat to check the bearing, and seal the pump, clean and replace the butter, replace the oil seal, bushing and other parts if necessary. Please refer to the installation for precautions for maintenance and replacement parts. <Use mechanical seal pump to transfer for about 3500 hours for regular maintenance).

10. When the product is stopped for a long time, the volute should be dismantled, the parts dried and coated with oil on the opposite moving joint surface, and stored in a dry place for later use.


Cutting submersible sewage pump

Diving flow booster

Submersible mixed flow pump

Submersible return pump

Corrosion resistant sewage pump

Submersible mixer

       位于Schw?bischGmünd的凯森Kaysen泵业有限公司是世界*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。

        凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.