"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
Imported pneumatic diaphragm pump——Shanghai distributor
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Components, systems, services and industry-specific solutions
气动隔膜泵不需灌引水，吸程高达5m，产品扬程可以达到70米左右，出口压力≥7kgf/cm2; 流动宽敞，通过性能好，允许通过*颗粒直径达10mm。抽送泥浆、杂质时，对泵磨损甚微; 扬程、流量可通过气阀开度实现无级调节（气压调节在1-7kgf/cm2之间）; 该气动隔膜泵无旋转部件，没有轴封，隔膜将抽送的介质与泵的运动部件、工作介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时，不会造成环境污染和危害人身安全; 不必用电，在易燃、易爆场所使用安全可靠; 可以浸没在介质中工作;
使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机，气动不锈钢隔膜泵也不会因此而损坏，不旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又有自动启动运行; 结构简单、易损件少，该气动不锈钢隔膜泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降; 可输送较粘的液体（粘度在1万厘泊以下）; 本泵无须用油润滑，即使空转，对气动不锈钢隔膜泵也无任何影响。
Germany Kaysen imported pneumatic diaphragm pump overview
Pneumatic diaphragm pump is the most novel pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. It can exhaust all kinds of corrosive liquids, liquids with particles, high-viscosity, volatile, flammable, and highly toxic liquids.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastic, and stainless steel. According to different liquid media, nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene are used. To meet the needs of different users.
Pneumatic diaphragm pump does not need irrigation and diversion, suction stroke is up to 5m, product head can reach about 70 meters, outlet pressure ≥ 7kgf/cm2; spacious flow, good passing performance, maximum particle diameter allowed to pass 10mm. When pumping mud and impurities, there is little wear on the pump; the head and flow can be adjusted steplessly through the opening of the air valve (pressure adjustment is between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal, The diaphragm completely separates the pumped medium from the pump's moving parts and working medium, and the delivered medium will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety; there is no need to use electricity, it is safe and reliable to use in flammable and explosive places; it can be immersed in the medium to work;
It is easy to use, reliable to work, and it only needs to open and close the gas valve to start and stop. Even if there is no medium for a long time due to unexpected conditions or sudden shutdown, the pneumatic stainless steel diaphragm pump will not be damaged by this. Automatically shut down, with self-protection performance, when the load returns to normal, it will automatically start running; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the pump will not touch the medium Valves, connecting rods and other moving parts, unlike other types of pumps, whose performance is gradually reduced due to wear of rotors, pistons, gears, blades and other parts; can transport relatively viscous liquids (viscosity below 10,000 centipoise); This pump does not need to be lubricated with oil, even if idling, it has no effect on the pneumatic stainless steel diaphragm pump.
●Easy to use, reliable in operation, simply open and close the gas valve to start and stop, even if there is no medium running for a long time due to unexpected conditions or the pump is suddenly stopped, it will not be damaged. Once the overload occurs, the pump will automatically stop. With self-protection performance, when the load returns to normal, it can automatically start running
●Simple structure, few wearing parts, simple structure of the pump, easy installation and maintenance, the medium conveyed by the pump will not contact the moving parts such as valve, connecting rod, etc. Unlike other types of pumps due to rotor, piston, gear, The performance of the blade and other components is gradually reduced
●Can transport viscous liquid (viscosity below 10,000 centipoise)
●No need to irrigate and diversion, suction head up to 5 meters, head up to 70 meters, outlet pressure ≧7bar
● Wide flow, good passing performance, allowing the maximum particle diameter to reach 10 mm. When pumping mud and impurities, there is little wear on the pump
●The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump
●No electricity needed, safe and reliable in flammable and explosive places
●Can be immersed in the medium to work
●The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure is adjusted between 1-7bar)
●The pump has no rotating parts, no shaft seal, and the pumped medium such as the diaphragm is completely separated from the pump moving parts and the workpiece medium, and the delivered medium will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety
●After the oil well is drilled, use pneumatic diaphragm pump to suck sediment and grouting.
●Suck various emulsions and fillers.
●Suction all kinds of sewage.
●Various strong acids, strong bases, strong corrosive liquids.
● Absorb various high-temperature liquids up to 150 degrees.
●It can suck peanut butter, kimchi, mashed potatoes, small red intestine, apple jam, chocolate, etc.
●Water accumulation in mines, tunnels, tunnels, beneficiation and slag. Pumping cement grouting and mortar.
●Stainless steel diaphragm pump pumps various rubber slurries.
●Stainless steel pneumatic diaphragm pump can suck various abrasives, corrosives, petroleum and mud, clean grease and general containers.
●Can absorb all kinds of highly toxic, flammable and volatile liquids.
●Stainless steel pneumatic diaphragm pump can be used to absorb paint, gum and paint.
●Stainless steel pneumatic diaphragm pump is used as the front-stage pressure sending device of various solid-liquid separation equipment.
●Pneumatic diaphragm pump can be used to clean the tanker and barge to absorb the sewage in the tank.
●Sucker hops and baking powder slurry, syrup, syrup.
●Adhesive and glue, all types can be sucked by pump.
●Various tile, porcelain, brick and pottery glaze slurry.
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.