1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2020-07-17 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 电动 介质温度: 250 ℃
工作压差: 适用介质:
压力环境: 常压 货号:
用途: 污水污物 外型尺寸:

进口切割潜水排污泵


“ KAYSEN是工业行业的可靠解决方案合作伙伴,并且是化学液处理的组件和系统的制造商。基于我们的创新产品,服务和针对特定行业的解决方案,我们为全球客户提供了更高的效率和安全性。”

"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."

进口切割潜水排污泵——上海总代理


我们的目标

为客户提高效率和安全性


我们在全球的市场水处理和化学流体处理


我们的报价 

组件,系统,服务和行业特定的解决方案


我们的价值

可靠性

革新

解决方案驱动

全球


Imported pneumatic diaphragm pump——Shanghai distributor


Our goal


Improve efficiency and safety for customers

Our global market water treatment and chemical fluid treatment


Our offer


Components, systems, services and industry-specific solutions



Our value


reliability


innovation


Solution driven


global



德国KAYSEN凯森口潜水深井泵概述:
1、潜水深井泵为离心式或混流式;采用水润滑轴承;与电机的联接采用联轴器刚性联接。深井泵叶轮在电机带动下旋转产生离心力,使液体能量增加经泵壳的导流作用进行提水。在水泵上端设有逆止阀体,防止电泵停机时,因扬水管中倒流的水损坏工作部件。阀上有泄水孔,可将管路中的水缓缓放掉,防止冬天冻裂管路。 (注:低扬程潜水泵不设逆止阀体)
2、潜水深井泵的电机为密闭充水湿式结构。电机定子绕组采用耐水的聚乙烯绝缘,尼龙护套多层结构的电磁线。导轴承及推力轴承均采用水润滑材质。电机内部充满清水,用以冷却电机和润滑轴承。电机底部装有调压膜,用以调整由电机温升引起的机体内清水的胀缩压差。电机的上端轴上装有防砂机构,用来阻止水中泥砂进入机体内部。
3、潜水深井泵的管路部分:用以联接电泵使其吊装在机井中,将水输送到地面上去。主要由短输水管、输水管、弯管、夹板等部件组成。短输出管是输水管路与电泵的连接过渡部件。弯管安装在井口处,以改变水流的传送方向。夹板是在深井泵的安装过程中吊装和固定输出管路。

主要优点:

具有结构简单

机组效率高

噪音小

运行安全可靠

安装维修方便的优点

主要应用:

具有结构简单,机组效率高,噪音小,运行安全可靠,安装维修方便的优点。它适用于从深水井,热水井及海洋提取,也可用于河流、水库、水渠等提取;

主要用于农田灌溉及高原山区的人畜用水,亦可供城市、工厂、铁路、矿山、工地供排水使用。

主要特点:

结构简单,节省原材料。

电机、水泵—体,潜入水中运行,安全可靠。

对井管无特殊要求,对输水管只要能承受相应压力即可。

安装使用维护方便简单,占地面积小,不需建造泵房。

 

技术参数

尺寸:6英寸—12英寸

流量:5—600立方/小时

扬程:6—600米

功率:3—250千瓦

电源:电压380V+5%,频率50Hz+1%赫兹,三相交流电。

生产标准:NEMA标准。


Germany  Kaysen imported submersible deep well pump overview:

1. The submersible deep well pump is centrifugal or mixed flow; it uses water-lubricated bearings; the connection to the motor uses a rigid coupling. The impeller of the deep well pump is driven by the motor to generate centrifugal force, which increases the energy of the liquid and conducts water extraction through the diversion effect of the pump casing. A check valve body is provided on the upper end of the water pump to prevent the working parts from being damaged by the backflow water in the water pipe when the electric pump is stopped. The valve has a drain hole, which can slowly drain the water in the pipeline to prevent the pipeline from freezing and cracking in winter. (Note: The low-lift submersible pump does not have a check valve body)

2. The motor of the submersible deep well pump is a closed water-filled wet structure. The stator winding of the motor adopts water-resistant polyethylene insulation and nylon sheathed multi-layer electromagnetic wires. Both guide bearing and thrust bearing are made of water lubricated material. The motor is filled with clean water to cool the motor and lubricate the bearings. The bottom of the motor is equipped with a pressure regulating film to adjust the expansion and contraction pressure difference of the clean water in the body caused by the temperature rise of the motor. The upper shaft of the motor is equipped with a sand control mechanism to prevent mud and sand from entering the body.

3. The pipeline part of the submersible deep well pump: it is used to connect the electric pump so that it is hoisted in the machine well and transports the water to the ground. It is mainly composed of short water pipe, water pipe, elbow, splint and other components. The short output pipe is the transitional part of the connection between the water pipeline and the electric pump. The elbow is installed at the wellhead to change the direction of water flow. The splint is used to hoist and fix the output pipeline during the installation of the deep well pump.


main advantage:


●Simple structure


●High unit efficiency


●Low noise


●Safe and reliable operation


●The advantages of convenient installation and maintenance


main application:


It has the advantages of simple structure, high efficiency of the unit, low noise, safe and reliable operation, and convenient installation and maintenance. It is suitable for extraction from deep water wells, hot water wells and oceans, and can also be used to extract rivers, reservoirs, water channels, etc.;


It is mainly used for farmland irrigation and human and animal water in plateau mountains, and can also be used for water supply and drainage in cities, factories, railways, mines, and construction sites.


main feature:


●Simple structure, saving raw materials.


●Motor and water pump body, submerged in water, safe and reliable.


●There are no special requirements for the well pipe, as long as the water pipe can bear the corresponding pressure.


●Easy to install and use and maintain, small footprint, no need to build pump room.


 


technical parameter:


●Size: 6 inches-12 inches


●Flow rate: 5—600 cubic meters/hour


●Lift: 6-600 meters


●Power: 3—250kw


●Power supply: voltage 380V+5%, frequency 50Hz+1% Hz, three-phase alternating current.


●Production standard: NEMA standard.


关于Kaysen


我们的基础

KAYSEN全球成功故事的基础是数十年来的工程专业知识,对应用的深刻理解和不断创新的高质量产品。因此,该公司集团不断投资于研发。KAYSEN在全球12个生产基地中也具有高度的垂直整合,从而确保为客户提供*的质量水平,并确保我们不受供应商市场波动的影响。


我们的宗旨

集成在精心设计的解决方案中的模块化KAYSEN系列,使我们各行各业的客户可以随时随地在其生产过程中实现*的安全性和效率。

对我们而言,与客户的亲近意味着与客户一起寻找适合个人需求的正确解决方案。个人,实用的建议和流畅的项目处理与我们全球客户服务一样,都是我们提供的服务的一部分。


我们的承诺

我们热情地致力于为每个客户选择合适的泵,可持续且具有成本效益的解决方案。

在90多个国家/地区,我们自己的销售,生产和服务公司的大约3,500名员工每天都在努力为每种产品提供快速可靠的服务。由于KAYSEN泵业作为全球市场*的地位,意味着对*产品和服务的持续承诺以及对负责任的思维和行动的义务。


Our foundation

KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.


Our aim

The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.


For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.


Our promise

We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.


In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.