|品牌: 德国凯森KAYSEN品牌||连接形式: 法兰||材质: 铸铁、不锈钢、铝合金、氟堕料|
|型号: KAYSEN||工作压差: 0||适用范围: 水、污水、石油、化工、电子、饮料、食品|
|压力环境: 常压||介质温度: 250℃||驱动方式: 电动|
German sanitary diaphragm pump
Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.
Manager Lv Mobile number: 15800827238
The pneumatic diaphragm pump adopts compressed air as the power source. For all kinds of corrosive liquids, liquids with particles, liquids with high viscosity, volatile, flammable and highly toxic can all be pumped out and exhausted.
The pump body uses four materials, aluminum alloy, cast iron, engineering plastic, stainless steel. According to different liquid media, NBR, chloroprene rubber, fluoro rubber, and PTFE are used respectively. To meet the needs of different users.
卫生级气动隔膜泵不需灌引水，吸程高达7m，扬程达50m，产品扬程可以达到70米左右，出口压力≥7kgf/cm2; 流动宽敞，通过性能好，允许通过*颗粒直径达10mm。抽送泥浆、杂质时，对泵磨损甚微; 扬程、流量可通过气阀开度实现无级调节（气压调节在1-7kgf/cm2之间）; 该气动隔膜泵无旋转部件，没有轴封，隔膜将抽送的介质与泵的运动部件、工作介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时，不会造成环境污染和危害人身安全; 不必用电，在易燃、易爆场所使用安全可靠; 可以浸没在介质中工作;
使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机，气动不锈钢隔膜泵也不会因此而损坏，不旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又有自动启动运行; 结构简单、易损件少，该气动不锈钢隔膜泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降; 可输送较粘的液体（粘度在1万厘泊以下）; 本泵无须用油润滑，即使空转，对气动不锈钢隔膜泵也无任何影响
Sanitary pneumatic diaphragm pump does not need to draw water, suction range up to 7m, head up to 50m, product lift can reach about 70 meters, outlet pressure ≥ 7kgf/cm2; The flow is spacious, through the good performance, allowing the maximum particle diameter up to 10mm. When pumping mud and impurities, the pump wears little; the lift and flow can be adjusted steplessly through the valve opening (air pressure adjustment between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts, no shaft seal, The diaphragm separates the pumped medium completely from the moving parts of the pump and the working medium, and the conveyed medium does not leak outward. Therefore, when pumping poisonous, easy-to-play or corrosive media, it will not cause environmental pollution and endanger personal safety; It is not necessary to use electricity, and it is safe and reliable to use in flammable and explosive places; It can be immersed in media;
Easy to use, reliable, and easy to open and close simply open and close the gas valve. Even if there is no medium operation or sudden shutdown due to unexpected conditions, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will be overloaded. Automatic shutdown, with self-protection, when the load returns to normal, there is automatic start operation; Simple structure, fewer wearing parts, the pneumatic stainless steel diaphragm pump structure is simple, easy installation, maintenance, the pump will not reach the medium Valves, linkages and other moving parts, unlike other types of pumps due to the wear of rotors, pistons, gears, blades and other parts of the performance of a gradual decline; can deliver a more viscous liquid (viscosity of 10,000 centipoise or less); This pump does not need to be lubricated with oil. Even if it is idle, it will not affect pneumatic stainless steel diaphragm pumps.
Easy to use, reliable, and easy to open and close simply open and close the gas valve, even if the pump is not operated for a long time due to unexpected circumstances or suddenly shut down the pump will not be damaged. Once overloaded, the pump will automatically stop, With self-protection, when the load returns to normal, it can automatically start running again
The structure is simple and the number of wearing parts is small. The pump is simple in structure and easy to install and maintain. The medium conveyed by the pump will not come into contact with the valve, connecting rod and other moving parts, unlike other types of pumps due to the rotor, piston, gears, blades. Wear of other parts causes gradual degradation of performance
Can deliver more viscous liquids (viscosity below 10,000 centipoise)
The flow is spacious and the performance is good, allowing the maximum particle diameter to reach 10 mm. When pumping mud and impurities, little wear on the pump
The pump does not need to be lubricated with oil. Even if it is idle, it will have no effect on the pump.
No need to use electricity, safe and reliable in flammable and explosive places
Can be immersed in media
Head and flow can be adjusted steplessly through the valve opening (pressure adjustment between 1-7bar)
The pump has no rotating parts and no shaft seal. The medium pumped by the diaphragm is completely separated from the moving parts of the pump and the workpiece medium, and the conveyed medium will not leak outward. Therefore, it will not cause environmental pollution and endanger personal safety when pumping toxic, volatile or corrosive media.
After the oil well is drilled, the sediment and grouting are sucked with a pneumatic diaphragm pump.
Suction various emulsions and fillers.
A variety of sewage.
All kinds of strong acid, strong alkali, strong corrosion liquid.
A variety of high-temperature liquids can absorb up to 150 degrees.
Can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
Water in mines, tunnels, tunnels, beneficiation and slag. Pump cement grouting and mortar.
Stainless steel diaphragm pumps pump various rubber pastes.
Stainless steel pneumatic diaphragm pump can absorb all kinds of abrasives, corrosives, oil and mud, cleaning grease and general containers.
Can absorb all kinds of highly toxic, flammable, volatile liquids.
Stainless steel pneumatic diaphragm pumps can be used to suck paint, gums, and pigments.
The stainless steel pneumatic diaphragm pump is used as a front-stage pressure-feeding device for various solid-liquid separation equipment.
Pneumatic diaphragm pumps can be used for tanker and barge clearance to pick up sewage from the tank.
Suction hops and baking powder slurry, syrup, sugar dense.
Adhesives and glues, all types can be pumped.
A variety of tile, porcelain, brick and ceramic glaze.
Quick and efficient maintenance, repair and overhaul of almost all brands and types of pumps.
Pumps are an indispensable element of your production process. Faulty pumps often result in reduced production capacity or even production downtime. Kason is a fast and efficient maintenance, repair and overhaul partner for almost all brands and types of pumps. Thanks to Kayson's machine diagnostics service, you can prevent production interruptions due to unforeseen machine downtime. Kaysen also provides 24-hour emergency pump support. We provide tailor-made solutions to meet all your needs.
Effective and regular maintenance is critical to the optimal operation of the pump. Preventive maintenance helps to ensure that you do not face sudden production downtime and related expenses. We perform machine diagnostic services to accurately determine the condition of your pump.
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.