进口高压柱塞泵(德国进口)品牌

进口高压柱塞泵(德国进口)品牌

产品介绍:

高压柱塞泵()品牌German high pressure piston pumpKAYSEN泵业中国总代理:营派阀门(上海)有限公司Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.电话:021-51860957 吕8 Manager ...


  • 物品单位:
  • 品牌: 德国凯森KAYSEN品牌

产品详细说明

品牌 德国凯森KAYSEN品牌
连接形式 法兰
材质 铸铁、不锈钢、铝合金、氟堕料
型号 KAYSEN
适用范围 水、污水、石油、化工、电子、饮料、食品
压力环境 常压
介质温度 1200℃
驱动方式 电动
适用介质

高压柱塞泵()品牌

German high pressure piston pump


KAYSEN泵业中国总代理:营派阀门(上海)有限公司

Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.

电话:021-51860957   8

     Manager Lv Mobile number: 15800827238


KAYSEN凯森高压柱塞泵概述

High-pressure plunger pump overview
高压柱塞泵的使用压力一般应在10MPa~100MPa之间。它属于容积式泵,借助工作腔里的容积周期性变化来达到输送液体的目的;原动机的机械能经泵直接转化为输送液体的压力能;泵的容量只取决于工作腔容积变化值及其在单位时间内的变化次数,理论上与排出压力无关。往复泵是借助于活塞在液缸工作腔内的往复运动(或通过隔膜、波纹管等挠性元件在工作腔内的周期性弹性变形)来使工作腔容积产生周期性变化的。在结构上,往复泵的工作腔是借助密封装置与外界隔开,通过泵阀(吸入阀和排出阀)与管路沟通或闭合。

The use pressure of high-pressure piston pump should generally be between 10MPa and 100MPa. It is a positive displacement type pump, which uses the periodical change of the volume in the working chamber to achieve the purpose of conveying the liquid; the mechanical energy of the prime mover is directly converted into the pressure energy of the liquid by the pump; the capacity of the pump only depends on the volume change value of the working chamber and its The number of changes in unit time is theoretically independent of discharge pressure. The reciprocating pump uses the reciprocating motion of the piston in the working chamber of the hydraulic cylinder (or the periodic elastic deformation of the flexible element such as a diaphragm, a bellows, etc.) in the working chamber to cause the periodical change of the working chamber volume. In terms of structure, the working chamber of the reciprocating pump is separated from the outside world by means of a sealing device, and communicates or closes with the pipeline through pump valves (intake valve and discharge valve).


主要特点:

Features

瞬时流量是脉动的这是因为在柱塞泵中,液体介质的吸入和排出过程是交替进行的,而且活塞在位移过程中,其速度又在不断地变化之中。在只有一个工作腔的泵中,泵的瞬时流量不仅随时间而变化,而且是不连续的。随着工作腔的增多,瞬时流量的脉动幅度越来越小,乃至在实用上可以认为是紊流。

平均流量是恒定的

理论上,泵的流量只取决于泵的主要结构参数 n(每分钟往复次数)、S(活塞行程)、D(活塞直径)、Z(活塞数目),与排出压力无关,且与输送介质的温度、粘度等物理、化学性质无关。所以说泵的流量是恒定的。

泵的压力取决于管道特性

柱塞泵的排出压力不能由泵本身限定,而是取决于泵装置的管道特性,并且与流量无关。也就是说,如果认为输送液体是不可压缩的,那么,在理论上可认为往复泵的排出压力将不受任何限制,即可根据泵装置的管道特性,建立泵的任何所需的排出压力。当然,所有往复泵都有一个泵的排出压力的规定,这不是说该泵的排出压力不会再升高,而只是说,由于原动机额定功率和泵本身的结构强度的限制,不允许在超出这一排出压力下使用而己。

对输送介质有较强的适应性

柱塞泵原则上可以输送任何介质,几乎不受介质的物理性能和化学性能的限制。当然,由于液力端的材料和制造工艺以及密封技术的限制,有时也会遇到不能适应的情况。

有良好的自吸性能

柱塞泵不仅有良好的吸入性能,而且还有良好的自吸性能。因此,对多数往复泵来说,在启动前通常不需灌泵。 机器效率高,节能。

Instantaneous flow is pulsating because in the plunger pump, the suction and discharge processes of the liquid medium alternate, and the speed of the piston changes constantly. In a pump with only one working chamber, the instantaneous flow rate of the pump not only varies with time, but also discontinuously. With the increase of work chambers, the pulsation amplitude of instantaneous flow is getting smaller and smaller, and even practically it can be considered as turbulence.

The average flow is constant

Theoretically, the pump's flow depends only on the pump's main structural parameters n (number of reciprocations per minute), S (piston stroke), D (piston diameter), Z (piston number), irrespective of the discharge pressure, and the conveying medium. It has nothing to do with physical and chemical properties such as temperature and viscosity. So the pump flow is constant.

The pressure of the pump depends on the characteristics of the pipeline

The discharge pressure of the plunger pump cannot be limited by the pump itself, but depends on the piping characteristics of the pump device and is independent of the flow. That is, if it is considered that the delivery liquid is incompressible, it is theoretically considered that the discharge pressure of the reciprocating pump will not be limited at all, that is, any desired discharge pressure of the pump can be established in accordance with the piping characteristics of the pump apparatus. Of course, all reciprocating pumps have a pump discharge pressure specification. This does not mean that the discharge pressure of the pump will not rise any more. It simply means that due to the limitations of the rated power of the prime mover and the structural strength of the pump itself, Use it beyond this discharge pressure.

Strong adaptability to conveying medium

The plunger pump can in principle convey any medium, which is hardly limited by the physical and chemical properties of the medium. Of course, due to limitations on the material and manufacturing process of the hydraulic end and the sealing technology, there are times when it is not possible to meet the situation.

Good self-priming performance

The plunger pump not only has good suction performance but also has good self-priming performance. Therefore, for most reciprocating pumps, it is usually not necessary to prime the pump before starting. Machine efficiency, energy saving.



主要优点:

Advantage

效率高

耐压高

寿命长

传输功率大

转速范围宽

有良好的自吸性能

efficient

High pressure resistance

long life

Large transmission power

Wide speed range

Good self-priming performance



主要应用:

Application

重型刨床

液压机

工程机械

船舶

矿山冶金机械

能源矿山开采

石油精细化工

食品药品加工

Heavy planer

Hydraulic Press

Construction Machinery

Ships

Mine metallurgical machinery

Energy mining

Petroleum Fine Chemicals

Food and Drug Processing


KAYSEN的技术团队

Technical team

对几乎所有品牌和类型的泵进行快速有效的维护,修理和检修。

泵是您生产过程中不可缺少的元素。故障泵经常会导致生产能力下降甚至生产停机。凯森是几乎所有品牌和类型的泵快速和有效的维修,维修和大修的合作伙伴。多亏了凯森的机器诊断服务,您可以防止由于无法预料的机器停机而造成的生产中断。凯森还提供24小时的紧急泵问题的支持。我们提供量身定制的解决方案以满足您的所有需求。

有效和定期的维护对于泵的*运行至关重要。预防性维护有助于确保您不会面临突发的生产停机和相关费用。我们执行机器诊断服务来精确确定您的泵的状况。

Quick and efficient maintenance, repair and overhaul of almost all brands and types of pumps.

Pumps are an indispensable element of your production process. Faulty pumps often result in reduced production capacity or even production downtime. Kason is a fast and efficient maintenance, repair and overhaul partner for almost all brands and types of pumps. Thanks to Kayson's machine diagnostics service, you can prevent production interruptions due to unforeseen machine downtime. Kaysen also provides 24-hour emergency pump support. We provide tailor-made solutions to meet all your needs.

Effective and regular maintenance is critical to the optimal operation of the pump. Preventive maintenance helps to ensure that you do not face sudden production downtime and related expenses. We perform machine diagnostic services to accurately determine the condition of your pump.


   位于Schw?bischGmünd的凯森Kaysen泵业有限公司是*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。
       凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
         Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

高压柱塞泵()品牌