|用途: 水、油漆、污水、化工液体等等||型号: KAYSEN||工作压差:|
|制造商:||压力环境: 常压||介质温度: 250℃|
|驱动方式: 电动||适用介质: 水||是否进口:|
Germany Kaysen imported electric diaphragm pump overview:
Germany Kaysen imported electric diaphragm pump adopts cycloidal pinwheel reducer transmission, which drives the double diaphragm to reciprocate through the crank slider mechanism, so that the working chamber volume changes alternately to achieve continuous suction and discharge of liquid. In recent years, due to Breakthrough progress has been made in diaphragm materials, and diaphragm pumps are widely used in petrochemical, ceramic, metallurgical and other industries. The diaphragm pump is characterized by no need to irrigate water, strong self-priming ability and low noise. The transported medium and the transmission mechanism are separated directly, so the medium will never leak out. Moreover, the pump itself has no shaft liquid seal and the service life is greatly extended. Application field: The diaphragm pump in the paint and ceramic industry has occupied an absolute dominant position; environmental protection, wastewater treatment, construction, sewage, fine chemicals are expanding its market share and have irreplaceable status as other pumps.
The main advantage:
● No need to irrigate water, self-priming capacity of more than 7 meters.
● Through good performance, particles, mud, etc. with a diameter of less than 10 mm can be passed without difficulty.
● Since the diaphragm will be separated by the conveying medium and the transmission mechanism, the medium will never leak out. Moreover, the pump itself has no shaft seal and the service life is greatly extended. According to different media, the diaphragm is divided into neoprene rubber, fluoro rubber, nitrile rubber, etc., which can fully meet the requirements of different users.
● Small size and light weight: Due to the use of the planetary cycloidal transmission structure, the pump type is obtained in a small size, such as compared with the same type of pump, its volume and weight are reduced by about half.
●The pump medium flows through the part, which can be divided into cast iron, stainless steel, rubber lined, motor divided into common type, explosion-proof type, frequency conversion type and electromagnetic speed control type according to user requirements. The pump is used in the following occasions.
Germany Kaysen imported pneumatic diaphragm pump overview
The pneumatic diaphragm pump is currently the most innovative type of pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. For various corrosive liquids, liquid with particles, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastics and stainless steel. NBR, neoprene, fluororubber, and polytetrafluoroethylene are used according to different liquid media. To meet the needs of different users.
The pneumatic diaphragm pump does not need to be irrigated, the suction stroke is up to 5m, the product lift can reach 70 meters, the outlet pressure is ≥7kgf/cm2; the flow is spacious, the pass performance is good, and the maximum particle diameter is allowed to reach 10mm. When the mud and impurities are pumped, the pump wears little; the lift and flow can be adjusted steplessly by the valve opening (the air pressure is adjusted between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium does not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and harm to personal safety; it does not need electricity, it is safe and reliable to use in flammable and explosive places; it can be submerged in the medium;
Easy to use, reliable in operation, easy to open and close, only need to open and close the gas valve, even if there is no medium running or sudden stop due to unexpected circumstances, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will not be overloaded. Automatic stop, self-protection performance, when the load returns to normal, there is automatic start-up operation; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the medium conveyed by the pump will not be in contact Valves, linkages and other moving parts, unlike other types of pumps, the performance of the rotor, pistons, gears, blades and other components wear down gradually; can transport a more viscous liquid (viscosity below 10,000 centipoise); The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pneumatic stainless steel diaphragm pump.
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.