进口气动隔膜泵 上海商

气动隔膜泵

“ KAYSEN是工业行业的可靠解决方案合作伙伴，并且是化学液处理的组件和系统的制造商。基于我们的创新产品，服务和针对特定行业的解决方案，我们为 客户提供了更高的效率和安全性。”

"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."

气动隔膜泵——上海

我们的目标

为客户提高效率和安全性

我们在 的市场水处理和化学流体处理

我们的报价

组件，系统，服务和行业特定的解决方案

我们的价值

可靠性

革新

解决方案驱动

Imported pneumatic diaphragm pump——Shanghai distributor

Our goal

Improve efficiency and safety for customers

Our global market water treatment and chemical fluid treatment

Our offer

Components, systems, services and industry-specific solutions

Our value

reliability

innovation

Solution driven

global

KAYSEN凯森气动隔膜泵概述
气动隔膜泵是目前业内*颖的一种泵类。
气动隔膜泵采用压缩空气为动力源，对于各种腐蚀性液体，带颗粒的液体，高粘度、易挥发、易燃、剧毒的液体，均能予以抽光吸尽。
泵体采用四种材质，铝合金、铸铁、工程塑料、不锈钢。根据不同液体介质分别采用丁晴橡胶、氯丁橡胶、氟橡胶、聚四氟乙烯。以满足不同用户的需要。

主要特点：
气动隔膜泵不需灌引水，吸程高达5m，产品扬程可以达到70米左右，出口压力≥7kgf/cm2; 流动宽敞，通过性能好，允许通过*颗粒直径达10mm。抽送泥浆、杂质时，对泵磨损甚微; 扬程、流量可通过气阀开度实现无级调节（气压调节在1-7kgf/cm2之间）; 该气动隔膜泵无旋转部件，没有轴封，隔膜将抽送的介质与泵的运动部件、工作介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时，不会造成环境污染和危害人身安全; 不必用电，在易燃、易爆场所使用安全可靠; 可以浸没在介质中工作;
使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机，气动不锈钢隔膜泵也不会因此而损坏，不旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又有自动启动运行; 结构简单、易损件少，该气动不锈钢隔膜泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降; 可输送较粘的液体（粘度在1万厘泊以下）; 本泵无须用油润滑，即使空转，对气动不锈钢隔膜泵也无任何影响。

主要优点：
●使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机泵也不会因此而损坏，一旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又能自动启动运行
●结构简单、易损件少，该泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不像其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降
●可输送较粘的液体(粘度在1万厘泊以下）
●不需灌引水，吸程高达5米，扬程达70米，出口压力≧7bar
●流动宽敞，通过性能好，允许通过*颗粒直径达10毫米。抽送泥浆、杂质时，对泵磨损甚微
●本泵无须用油润滑，即使空转，对泵也无任何影响
●不必用电，在易燃、易爆场所使用安全可靠
●可以浸没在介质中工作
●扬程、流量可通过气阀开度实现无级调节(气压调节在1-7bar之间)
●该泵无旋转部件，没有轴封，隔膜等抽送的介质与泵的运动部件、工件介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易挥发或腐蚀性介质时，不会造成环境污染和危害人身安全

主要应用：
●油井钻好后，用气动隔膜泵吸沉积物及灌浆。
●吸各种乳剂和填料。
●吸各种污水。
●各种强酸、强碱、强腐蚀液体。
●吸各种高温液体*可耐150度。
●可以吸花生酱、泡菜、土豆泥、小红肠、果酱苹果浆、巧克力等。
●矿井、坑道、隧道、选矿、矿渣中的积水。泵吸水泥灌浆及灰浆。
●不锈钢隔膜泵泵吸各种橡胶浆。
●不锈钢气动隔膜泵可以吸各种磨料、腐蚀剂、石油及泥浆、清洗油垢及一般容器。
●可以吸各种剧毒、易燃、易挥发液体。
●不锈钢气动隔膜泵可以用于吸油漆、树胶、颜料。
●不锈钢气动隔膜泵作为各种固液体分离设备的前级送压装置。
●气动隔膜泵可以用于为油轮，驳船清仓吸取仓内污水。
●吸啤酒花及发酵粉稀浆、糖浆、糖密。
●粘合剂和胶水、全部种类可用泵吸取。
●各种瓦、瓷、砖器及陶器釉浆。

Germany  Kaysen imported pneumatic diaphragm pump overview

Pneumatic diaphragm pump is the most novel pump in the industry.

The pneumatic diaphragm pump uses compressed air as the power source. It can exhaust all kinds of corrosive liquids, liquids with particles, high-viscosity, volatile, flammable, and highly toxic liquids.

The pump body is made of four materials, aluminum alloy, cast iron, engineering plastic, and stainless steel. According to different liquid media, nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene are used. To meet the needs of different users.

main feature:

Pneumatic diaphragm pump does not need irrigation and diversion, suction stroke is up to 5m, product head can reach about 70 meters, outlet pressure ≥ 7kgf/cm2; spacious flow, good passing performance, maximum particle diameter allowed to pass 10mm. When pumping mud and impurities, there is little wear on the pump; the head and flow can be adjusted steplessly through the opening of the air valve (pressure adjustment is between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal, The diaphragm completely separates the pumped medium from the pump's moving parts and working medium, and the delivered medium will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety; there is no need to use electricity, it is safe and reliable to use in flammable and explosive places; it can be immersed in the medium to work;

It is easy to use, reliable to work, and it only needs to open and close the gas valve to start and stop. Even if there is no medium for a long time due to unexpected conditions or sudden shutdown, the pneumatic stainless steel diaphragm pump will not be damaged by this. Automatically shut down, with self-protection performance, when the load returns to normal, it will automatically start running; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the pump will not touch the medium Valves, connecting rods and other moving parts, unlike other types of pumps, whose performance is gradually reduced due to wear of rotors, pistons, gears, blades and other parts; can transport relatively viscous liquids (viscosity below 10,000 centipoise); This pump does not need to be lubricated with oil, even if idling, it has no effect on the pneumatic stainless steel diaphragm pump.

main advantage:

●Easy to use, reliable in operation, simply open and close the gas valve to start and stop, even if there is no medium running for a long time due to unexpected conditions or the pump is suddenly stopped, it will not be damaged. Once the overload occurs, the pump will automatically stop. With self-protection performance, when the load returns to normal, it can automatically start running

●Simple structure, few wearing parts, simple structure of the pump, easy installation and maintenance, the medium conveyed by the pump will not contact the moving parts such as valve, connecting rod, etc. Unlike other types of pumps due to rotor, piston, gear, The performance of the blade and other components is gradually reduced

●Can transport viscous liquid (viscosity below 10,000 centipoise)

●No need to irrigate and diversion, suction head up to 5 meters, head up to 70 meters, outlet pressure ≧7bar

● Wide flow, good passing performance, allowing the maximum particle diameter to reach 10 mm. When pumping mud and impurities, there is little wear on the pump

●The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump

●No electricity needed, safe and reliable in flammable and explosive places

●Can be immersed in the medium to work

●The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure is adjusted between 1-7bar)

●The pump has no rotating parts, no shaft seal, and the pumped medium such as the diaphragm is completely separated from the pump moving parts and the workpiece medium, and the delivered medium will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety

main application:

●After the oil well is drilled, use pneumatic diaphragm pump to suck sediment and grouting.

●Suck various emulsions and fillers.

●Suction all kinds of sewage.

●Various strong acids, strong bases, strong corrosive liquids.

● Absorb various high-temperature liquids up to 150 degrees.

●It can suck peanut butter, kimchi, mashed potatoes, small red intestine, apple jam, chocolate, etc.

●Water accumulation in mines, tunnels, tunnels, beneficiation and slag. Pumping cement grouting and mortar.

●Stainless steel diaphragm pump pumps various rubber slurries.

●Stainless steel pneumatic diaphragm pump can suck various abrasives, corrosives, petroleum and mud, clean grease and general containers.

●Can absorb all kinds of highly toxic, flammable and volatile liquids.

●Stainless steel pneumatic diaphragm pump can be used to absorb paint, gum and paint.

●Stainless steel pneumatic diaphragm pump is used as the front-stage pressure sending device of various solid-liquid separation equipment.

●Pneumatic diaphragm pump can be used to clean the tanker and barge to absorb the sewage in the tank.

●Sucker hops and baking powder slurry, syrup, syrup.

●Adhesive and glue, all types can be sucked by pump.

●Various tile, porcelain, brick and pottery glaze slurry.

关于Kaysen

我们的基础

KAYSEN 成功故事的基础是数十年来的工程专业知识，对应用的深刻理解和不断创新的高质量产品。因此，该公司集团不断投资于研发。KAYSEN在 12个生产基地中也具有高度的垂直整合，从而确保为客户提供*的质量水平，并确保我们不受供应商市场波动的影响。

我们的宗旨

集成在精心设计的解决方案中的模块化KAYSEN系列，使我们各行各业的客户可以随时随地在其生产过程中实现*的安全性和效率。

对我们而言，与客户的亲近意味着与客户一起寻找适合个人需求的正确解决方案。个人，实用的建议和流畅的项目处理与我们 客户服务一样，都是我们提供的服务的一部分。

我们的承诺

我们热情地致力于为每个客户选择合适的泵，可持续且具有成本效益的解决方案。

在90多个国家/地区，我们自己的销售，生产和服务公司的大约3,500名员工每天都在努力为每种产品提供快速可靠的服务。由于KAYSEN泵业作为 市场*的地位，意味着对*产品和服务的持续承诺以及对负责任的思维和行动的义务。

Our foundation

KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.

Our aim

The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.

For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.

Our promise

We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.

In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.