进口潜水搅拌机(德国原装进口)

进口潜水搅拌机(德国原装进口)

产品介绍:

进口潜水搅拌机(原装) 德国KAYSEN凯森潜水搅拌机概述 进口潜水搅拌机又称潜水推进器,适用于污水处理厂的工艺流程中推进搅拌含有悬浮物的污水、稀泥浆、工业过程液体等,创建水流,加强...


  • 价格: 5800
  • 物品单位:
  • 品牌: KAYSEN

产品详细说明

品牌 KAYSEN
型号 KAYSEN
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质

进口潜水搅拌机(原装)


德国KAYSEN凯森潜水搅拌机概述
进口潜水搅拌机又称潜水推进器,适用于污水处理厂的工艺流程中推进搅拌含有悬浮物的污水、稀泥浆、工业过程液体等,创建水流,加强搅拌功能,防止污泥沉淀,是市政和工业污水处理工艺流程上的重要设备。分为混合潜水搅拌机、低速潜水推进搅拌机。

主要特点:

进口潜水搅拌机为混合搅拌和低速推流两大系列产品。

混合系列搅拌机适用于污水处理厂和工业流程中搅拌含有悬浮物的液体。

低速推流系列搅拌机适用于工业和城市污水处理厂曝气池,其产生低切向流的强力水流,可用于循环及硝化、脱氮和除磷阶段创建水流等。

主要优点:

●潜水搅拌器的叶片具有自洁功能,可防杂物缠绕、堵塞

●与曝气系统配合使用可使能耗大幅度降低,充氧量明显提高,有效防止沉淀
●搅拌机的结构紧凑、体积小、重量轻。
●操作维护简单、安装方便快捷、使用寿命长

●搅拌机机械密封的摩擦付材质为耐腐蚀的碳化钨,所有紧固件均为不锈钢材质
●搅拌机的电机绕组为F级绝缘,防护等级为IP68,选用一次润滑免维护轴承,具有油室泄漏检测和电机绕组过热保 护功能,使电机的工作更加安全可靠

主要应用:
●防止污泥沉淀及产生污水处理潜水搅拌机厂
●污泥混合液
●工业过程液体等
●创建水流
●加强搅拌功能
●沟内流速不低于0.1m/s

●工业流程中搅拌含有悬浮物的污水

质量和环境在Kaysen

质量是我们的传统

我们的经营理念的核心驱动因素不仅要保持,而且要始终提高产品质量,同时尊重环保主义的各个方面。对我们来说,生态责任和经济成功是我们日常工作的基本价值。

我们质量方针的目标是提供符合每种特定产品的任何和所有质量要求的产品。这不仅包括法律规定,还包括所有利益相关方(客户,雇员,供应商,员工,总社会和法律机构)的必需品。

ISO 9001的要求被固定为*标准,通过在增值链的各个环节不断改进,提升和预防故障,促使我们提供*水平的内部/外部客户和供应商满意度。我们根据ISO 9001:2015进行认证,并强调我们的环境政策与ISO 14001:2015的相关性。

商业 中的每一个企业都有特殊的责任来保护自然资源。有意识地使用和消耗任何资源,能源,原材料以及辅助和操作材料,是我们企业文化的重要组成部分。每个Kaysen员工都意识到自己有责任为实现我们的环境政策的既定目标做出贡献。我们也努力指出任何可用的回收资源,并利用它们与我们的客户和供应商合作。

作为14001认证的一部分,每台运送给我们的泵都必须附带一张完整的除污表。否则,由于诊断或维修原因不能进行泵的拆卸。

导电的Kaysen泵符合94/9/EG指令(ATEX)。无菌系列BIOCOR已通过EHEDG认证。所有Kaysen泵也经过广泛的测试运行,以确保*的功能。

Quality & Environment at Kaysen

Quality is our Tradition

The central, driving factors of our business philosophy are not only to keep up, but to always increase product quality while at the same time respecting all aspects of environmentalism. For us, ecological responsibility and economic success are basic values in our everyday activities.

The target of our quality policy is to offer products that correspond to any and all quality requirements for each specific product. This includes taking into account not only the legal regulations, but also the necessities of all interested parties (customers, employees, suppliers, associates, general society and legal authorities).

The requirements of the ISO 9001 are fixed as a minimum standard and drive us to deliver a maximum level of internal/external customer and supplier satisfaction through constant improvement, advancement and fault prevention in all phases of the value-added chain. We are certificated according to ISO 9001:2015 and — in order to underline the relevance of our environmental policy — to ISO 14001:2015.

Each enterprise in the business world has a special responsibility to preserve the natural resources of life. Conscious usage and consumption of any resources, energy, and raw as well as auxiliary and operational materials, is a substantial component of our corporate culture. Each Kaysen employee is aware of her or his personal responsibility to contribute to the realization of the defined targets of our environmental policy. We also strive to point out any available recycling resources, and to make use of them in cooperation with our customers and suppliers.

As part of the 14001 certification, every pump that is shipped to us must be accompanied by a completed decontamination sheet. Otherwise, a dismantling of the pump for diagnosis or maintenance reasons cannot be carried out.

Conductive Kaysen pumps conform to the 94/9/EG directive (ATEX). The aseptic series BIOCOR is EHEDG certified. All Kaysen pumps also undergo extensive test runs to ensure perfect functionality