Germany imported pneumatic diaphragm pump
Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.
Manager Lv Mobile number: 15800827238
Kaysen Pneumatic diaphragm pump overview
Stainless steel pneumatic diaphragm pump is the most novel type of pump in China. For a variety of corrosive liquids, liquids with particles, high viscosity, volatile, flammable, highly toxic liquids, can be pumped out.
Stainless steel pneumatic diaphragm pump uses compressed air as the power source. For all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable, highly toxic liquids, all can be pumped out.
The pump body uses four materials, aluminum alloy, cast iron, engineering plastic, stainless steel. According to different liquid media, NBR, chloroprene rubber, fluoro rubber, and PTFE are used respectively. To meet the needs of different users.
Can be immersed in media
No need to inject water. Suction up to 5m. Head up to 50m. Outlet pressure ≥6kgf/cm2
No need to use electricity. Safe and reliable use in flammable and explosive places
This pump does not require oil lubrication, even if idle. It also has no effect on the pump. This is the biggest feature of the pump.
It is spacious and has good performance. It is allowed to pass the maximum particle diameter up to 10mm. When pumping mud and impurities, little wear on the pump
Head and flow can be adjusted steplessly by valve opening (pressure adjustment between 1 and 7 bar)
The pump has no rotating parts, there is no shaft seal, and the medium pumped by the diaphragm j| is completely separated from the moving parts of the pump and the workpiece medium, and the conveyed medium does not leak out. Therefore, when pumping toxic, easy-to-play or corrosive media, it will not cause environmental pollution and endanger personal safety.
The structure is simple and there are few wearing parts. The structure of the pump is simple, and the installation and maintenance are convenient. The medium conveyed by the pump will not come into contact with the valve, the connecting rod and other moving parts, unlike other types of pumps due to the rotor, piston, gears, blades. Wear of other parts causes gradual degradation of performance
Easy to use, reliable operation, start and stop simply open and close the gas valve. Even if the pump is stopped for a long time without media due to an unexpected situation, the pump will not be damaged. Once overloaded, the pump will stop from the ground and have self-protection. Once the load is back to normal, it can automatically start running again.
A variety of sewage.
Suction various emulsions and fillers.
All kinds of strong acid, strong alkali, strong corrosion liquid.
A variety of high-temperature liquids can absorb up to 150 degrees.
Can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
Can be used to suck paint, gums, pigments.
Adhesives and glues, all types can be pumped.
A variety of tile, porcelain, brick and ceramic glaze.
After the oil well is drilled, the sediment and grouting are sucked with a pneumatic diaphragm pump.
Stainless steel diaphragm pumps pump various rubber pastes.
Pneumatic diaphragm pumps can be used for tanker and barge clearance to pick up sewage from the tank.
Suction hops and baking powder slurry, syrup, sugar dense.
Water in mines, tunnels, tunnels, beneficiation and slag. Pump cement grouting and mortar.
Stainless steel pneumatic diaphragm pump can absorb all kinds of abrasives, corrosives, oil and mud, cleaning grease and general containers.
Can absorb all kinds of highly toxic, flammable, volatile liquids.
The stainless steel pneumatic diaphragm pump is used as a front-stage pressure-feeding device for various solid-liquid separation devices.
Quick and efficient maintenance, repair and overhaul of almost all brands and types of pumps.
Pumps are an indispensable element of your production process. Faulty pumps often result in reduced production capacity or even production downtime. Kason is a fast and efficient maintenance, repair and overhaul partner for almost all brands and types of pumps. Thanks to Kayson's machine diagnostics service, you can prevent production interruptions due to unforeseen machine downtime. Kaysen also provides 24-hour emergency pump support. We provide tailor-made solutions to meet all your needs.
Effective and regular maintenance is critical to the optimal operation of the pump. Preventive maintenance helps to ensure that you do not face sudden production downtime and related expenses. We perform machine diagnostic services to accurately determine the condition of your pump.
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.