1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台 建议零销价: 5800元/台
发布日期: 2018-03-27 更新日期: 2020-11-12
品牌: 德国凯森KAYSEN品牌 型号: KAYSEN
驱动方式: 电动 介质温度: 12000 ℃
工作压差: 0 适用介质:
压力环境: 常压 货号:
用途: 外型尺寸:

进口计量泵(德国进口)品牌

Germany imported metering pump


德国KAYSEN泵业中国总代理:营派阀门(上海)有限公司

Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.

德国KAYSEN凯森进口隔膜计量泵概述

Germany imported metering pump

在隔膜式计量泵家族成员里,液压隔膜计量泵由于采用了液压油均匀地驱动隔膜,克服了机械直接驱动方式下泵隔膜受力过分集中的缺点,提升了隔膜寿命和工作压力上限。为了克服单隔膜式计量泵可能出现的因隔膜破损而造成的工作故障,有的计量泵配备了隔膜破损传感器,实现隔膜破裂时自动连锁保护

液压隔膜计量泵还有安全阀、放气阀、补油阀,三阀缺一不可,安全阀的起跳压力略高于管道系统压力。放气阀作用是排放液力端内气体。补油阀起到向液力端补油。

顾名思义,隔膜式计量泵利用特殊设计加工的柔性隔膜取代活塞,在驱动机构作用下实现往复运动,完成吸入-排出过程。由于隔膜的隔离作用,在结构上真正实现了被计量流体与驱动润滑机构之间的隔离。高科技的结构设计和新型材料的选用已经大大提高了隔膜的使用寿命,加上复合材料优异的耐腐蚀特性,隔膜式计量泵成为流体计量应用中的主力泵型。

在隔膜式计量泵家族成员里,液压隔膜计量泵由于采用了液压油均匀地驱动隔膜,克服了机械直接驱动方式下泵隔膜受力过分集中的缺点,提升了隔膜寿命和工作压力上限。为了克服单隔膜式计量泵可能出现的因隔膜破损而造成的工作故障,有的计量泵配备了隔膜破损传感器,实现隔膜破裂时自动连锁保护;具有双隔膜结构泵头的计量进一步提高了其安全性,适合对安全保护特别敏感的应用场合。

作为隔膜式计量泵的一种,电磁驱动式计量泵以电磁铁产生脉动驱动力,省却了电机和变速机构,使得系统小巧紧凑,是小量程低压计量泵的重要分支。

精密计量泵技术已经非常成熟,其流体计量输送能力*可达0-100,000l/h,工作压力*达4000bar,工作范围覆盖了工业生产所有领域的要求。

In the family of diaphragm metering pumps, the hydraulic diaphragm metering pump overcomes the disadvantages of over-concentration of the pump diaphragm under mechanical direct drive due to the use of hydraulic oil to drive the diaphragm evenly, which increases the diaphragm life and upper working pressure limit. In order to overcome the possible malfunction caused by diaphragm breakdown in single-diaphragm metering pumps, some metering pumps are equipped with a diaphragm breakage sensor to achieve automatic interlock protection when the diaphragm breaks.

Hydraulic diaphragm metering pumps also have safety valves, bleed valves, and charge valves. Three valves are indispensable. The take-off pressure of the safety valve is slightly higher than the pressure in the piping system. The role of the bleed valve is to discharge the gas in the hydraulic end. The replenishing valve serves to fill the fluid side.

As the name suggests, the diaphragm metering pump replaces the piston with a specially designed and manufactured flexible diaphragm, and realizes reciprocating motion under the action of the drive mechanism to complete the suction-discharge process. Due to the isolation effect of the diaphragm, the isolation between the metered fluid and the drive lubrication mechanism is indeed realized in the structure. The high-tech structural design and the selection of new materials have greatly improved the service life of the diaphragm. With the excellent corrosion resistance of the composite material, the diaphragm metering pump has become the main pump type in fluid metering applications.

In the family of diaphragm metering pumps, the hydraulic diaphragm metering pump overcomes the disadvantages of over-concentration of the pump diaphragm under mechanical direct drive by using hydraulic oil to drive the diaphragm evenly, which increases the life of the diaphragm and the upper limit of the working pressure. In order to overcome the possible malfunction caused by diaphragm breakdown in single-diaphragm metering pumps, some metering pumps are equipped with a diaphragm breakage sensor to achieve automatic interlock protection when the diaphragm breaks; the metering with a double diaphragm structure pump head further enhances its safety Sex, suitable for applications that are particularly sensitive to safety protection.

As a kind of diaphragm type metering pump, electromagnetic driven metering pump uses electromagnet to generate pulsating driving force, which saves the motor and transmission mechanism, and makes the system compact and compact. It is an important branch of a small-range low-pressure metering pump.

The precision metering pump technology has been very mature. Its fluid metering and conveying capacity can reach 0-100,000 l/h and the working pressure can reach up to 4000 bar. The working range covers the requirements of all fields of industrial production.

 

主要特点:

Features

多种材质及泵类结构可选

稳定精度±2%(调节比10%-100%) 

坚固耐用,维护成本低

机械驱动PTFE膜片(多种隔膜材质) 

在泵运行或停止状态均可调节流量

安装空间小

A variety of materials and pump structure optional

Stable accuracy ±2% (adjusting ratio 10%-100%)

Rugged, low maintenance costs

Mechanically-driven PTFE diaphragm (various diaphragm materials)

The flow can be adjusted when the pump is running or stopped

Small installation space

 

主要优点:

Advantage

可以安装于药槽上

安装容易、维修、保养构造上,完全无泄漏

可用PVC、PTFE、PVDF、1Cr18Ni9Ti、316等作为泵头材料

适用于各种耐酸碱药液

操作安全性能高

运转中流量随意调整

Can be installed on drug tank

Easy to install, repair and maintenance, no leakage

PVC, PTFE, PVDF, 1Cr18Ni9Ti, 316, etc. can be used as pump head material

Suitable for all kinds of acid and alkali resistant liquids

High operating safety

Adjustable flow during operation


主要应用:

Application

各种橡胶浆乳胶、有机溶剂、填料

啤酒花及发酵粉稀浆、糖浆、糖密

用计量泵为油轮驳船清仓吸取仓内污水及剩油

计量泵吸矿井、坑道、隧道、下水道中污水、沉淀物

计量泵吸泡菜果酱、土豆泥、巧克力等

计量泵吸油漆、树胶、颜料粘合剂

油罐车、油库、油品装卸

各种特殊介质的吸送

各种剧毒、易燃、易挥发液体

可输送较高温度的介质150℃

各种强酸、强碱、强腐蚀液体

作为各种压滤机前级送压装置

热水回收及循环;各种瓷器轴浆水泥灌浆灰浆泥浆

All kinds of rubber latex, organic solvents, fillers

Hops and yeast powder, syrup, sugar

Use a metering pump to clear the tanker barge for sewage and residual oil in the tank

Metering pump suction mine, tunnel, tunnel, sewer sewage, sediment

Metering pump for kimchi jam, mashed potatoes, chocolate, etc.

Metering pumps for paints, gums, paint binders

Tanker, depot, oil handling

Suction of various special media

Various highly toxic, flammable, volatile liquids

Can convey higher temperature medium 150°C

Various strong acids, strong alkalis, strong corrosive liquids

As a variety of filter press before the pressure device

Hot Water Recovery and Recycling; Various Kinds of Porcelain Axial Cement Grouting Mortar


KAYSEN的技术团队

Technical team

对几乎所有品牌和类型的泵进行快速有效的维护,修理和检修。

泵是您生产过程中不可缺少的元素。故障泵经常会导致生产能力下降甚至生产停机。凯森是几乎所有品牌和类型的泵快速和有效的维修,维修和大修的合作伙伴。多亏了凯森的机器诊断服务,您可以防止由于无法预料的机器停机而造成的生产中断。凯森还提供24小时的紧急泵问题的支持。我们提供量身定制的解决方案以满足您的所有需求。

有效和定期的维护对于泵的*运行至关重要。预防性维护有助于确保您不会面临突发的生产停机和相关费用。我们执行机器诊断服务来精确确定您的泵的状况。

Quick and efficient maintenance, repair and overhaul of almost all brands and types of pumps.

Pumps are an indispensable element of your production process. Faulty pumps often result in reduced production capacity or even production downtime. Kason is a fast and efficient maintenance, repair and overhaul partner for almost all brands and types of pumps. Thanks to Kayson's machine diagnostics service, you can prevent production interruptions due to unforeseen machine downtime. Kaysen also provides 24-hour emergency pump support. We provide tailor-made solutions to meet all your needs.

Effective and regular maintenance is critical to the optimal operation of the pump. Preventive maintenance helps to ensure that you do not face sudden production downtime and related expenses. We perform machine diagnostic services to accurately determine the condition of your pump.


   位于德国Schw?bischGmünd的凯森Kaysen泵业有限公司是*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“德国制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。
       德国凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
         Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

进口计量泵(德国进口)品牌