1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2018-07-17 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 电动 介质温度: 250 ℃
工作压差: 0 适用介质:
压力环境: 常压 货号: 89855451
用途: 水、污水等等 外型尺寸:

进口混流泵-德国进口混流泵品牌

德国KAYSEN凯森进口混流泵概述
原动机带动叶轮旋转后,对液体的作用既有离心力又有轴向推力,是离心泵和轴流泵的综合,液体斜向流出叶轮。因此它是介于离心泵和轴流泵之间的一种泵。混流泵的比转速高于离心泵,低于轴流泵,一般在300-500之间。它的扬程比轴流泵高,但流量比轴流泵小,比离心泵大。用于输送清洁和污染的介质,化学中性或侵蚀性的介质,还有化工流程中强制循环、海水养殖、城市煤气工程、水处理系统。

主要特点:
混流泵是一种“拉出”式结构泵,在检查和拆卸叶轮和轴封时,毋须将与泵体相连接的管路拆开。装有精密加工的泵轴和装有稀油润滑的轴承,在填料函盖中装有防护轴套。轴承箱的油位,可由恒位油杯来控制。
泵体的支脚,可承受来自管路的任何载荷,并直接传递给基础。这样,转子不会因为泵承受受载荷而产生弯曲,从而保证轴承的*使用寿命。
由于较大的过流面积,从而减少阻塞。
泵的旋转方向,从驱动端看,为顺时针方向。
动力驱动可采用电动机或内燃机。
泵装置上可以配备完整的放气装置,有利于吸入管路的排气。
轴封
填料密封或双端面机械密封。
材质
耐腐蚀材料。


主要优点:
过流截面大,不易堵塞
结构坚固,寿命长
泵效率高,能耗小
泵在整个性能范围内的能耗均匀,可以在闭阀下启动,而电机不致过载


主要应用:
海水养殖
输送清洁和污染的介质
城市煤气工程
水处理系统
化工流程中强制循环
化学中性或侵蚀性的介质、

德国KAYSEN为您服务

售前服务:
1、我公司可以为客户提供最完善的产品介绍、选型资料。
2、专业人员提供设计方案与咨询服务,推荐最适合客户实际需要的产品。

售中服务:
1、为用户提供全面技术支持,配合用户选型,提供最经济合理的方案。
2、免费为用户提供培训、指导安装和维修方法,确定*解决方案。
3、我们保证按照合同规定的交货期为您及时送货。

售后服务:
1、质量保修期:按国家对机电产品的规定质保期为一年。在质保期内,用户将享受无偿服务,终身有偿服务、长期提供配件。

2、如客户在使用我们的产品过程中出现任何问题,我们将为您提供以下售后服务:

2小时迅速反应机制
用户在使用我公司产品时如遇任何问题时,可致电我公司售后服务部,我们在收到用户通知后的2小时内迅速给予反应,为用户提供紧急解决方案。

24小时使产品正常运行
我们在2小时反应机制中如不能为用户解决问题时,可迅速为用户提供相关损坏的配件,并通过合作快递公司送致需方,可在24小时内到达需方现场,为用户解决问题。

48小时*
如遇到前2种方案均不能解决的故障问题,我们将迅速安排技术员48小时内*,“不解决问题不罢修”,直致为用户解决为止。

72小时换货处理
如遇重大质量问题,我们将在接到客户通知后的一日内立即无条件将相同型号产品送致用户现场。

质保期外的售后服务
如因用户使用不当或在保修期外,而引起三星产品的损坏或不能正常工作,我公司也将对产品提供维修服务,仅收取更换配件的成本费。并免费提供技术培训,使客户能够更好的使用产品。

German Kaysen is at your service

pre-sale service:

1. Our company can provide customers with the most complete product introduction and selection information.

2. Professionals provide design solutions and consulting services to recommend products that best suit the customer's actual needs.

In-sale service:

1. Provide users with comprehensive technical support and cooperate with users to select the most economical and reasonable solutions.

2. Provide free training for users, guide installation and maintenance methods, and determine the best solution.

3. We guarantee that you will deliver the goods in time according to the delivery date specified in the contract.

After sales service:

1. Quality warranty period: According to the state's regulations on mechanical and electrical products, the warranty period is one year. During the warranty period, users will enjoy free services, lifetime paid services, and long-term supply of accessories.

2. If there are any problems in the process of using our products, we will provide you with the following after-sales services:

2-hour rapid response mechanism

If you encounter any problems when using our products, you can call our after-sales service department. We will respond quickly within 2 hours after receiving the user notification to provide emergency solutions for users.

24 hours to make the product run normally

If we can't solve the problem for the user in the 2-hour reaction mechanism, we can quickly provide the user with the relevant damaged accessories, and send the demander through the cooperative courier company, and can reach the demand side site within 24 hours to solve the problem for the user.

48-hour on-site service

If you encounter a problem that cannot be solved by the first two solutions, we will promptly arrange the technician to come to the door within 48 hours, "do not solve the problem without repairing", and solve it for the user.

72 hours replacement

In case of major quality problems, we will unconditionally deliver the same model to the user's site immediately within one day after receiving the customer's notice.

After-sales service outside the warranty period

If the Samsung product is damaged or not working properly due to improper use of the user or outside the warranty period, our company will also provide repair service for the product, and only charge the cost of replacing the accessory. Technical training is provided free of charge to enable customers to better use the product.


进口混流泵-德国进口混流泵品牌