进口电动隔膜泵 进口隔膜泵304316

进口电动隔膜泵 进口隔膜泵304316

产品介绍:

进口电动隔膜泵 进口隔膜泵304316 德国KAYSEN凯森进口电动隔膜泵概述: 德国凯森进口电动隔膜泵采用摆线针轮减速机传动,通过曲轴滑块机构带动双隔膜作往复运动,使工作腔容积发生交替...


  • 物品单位:
  • 品牌: 德国KAYSEN

产品详细说明

品牌 德国KAYSEN
用途 水、油漆、污水、化工液体等等
型号 KAYSEN
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质

进口电动隔膜泵 进口隔膜泵304316


德国KAYSEN凯森进口电动隔膜泵概述:
德国凯森进口电动隔膜泵采用摆线针轮减速机传动,通过曲轴滑块机构带动双隔膜作往复运动,使工作腔容积发生交替变化从而达到将液体不断地吸入和排出,近年来,由于在隔膜材质上取得了突破性的进展,进口电动隔膜泵广泛应用于石化、陶瓷、冶金等行业。进口电动隔膜泵特点是不需灌引水,自吸能力强,噪音小。直接将被输送介质和传动机械件分开,所以介质*不会向外泄漏。且泵本身无轴液封,使用寿命大大延长。应用领域:喷漆、陶瓷业中隔膜泵已占有*的主导地位;环保、废水处理、建筑、排污、精细化工中正在扩大它的市场份额,并具有其他泵不可替代的地位。

主要优点:
不需灌引水,自吸能力达7米以上。
通过性能好,直径在10毫米以下的颗粒、泥浆等均可以毫不费力地通过。
由于隔膜将被输送介质和传动机械件分开,所以介质*不会向外泄漏。且泵本身无轴封,使用寿命大大延长。根据不同介质,隔膜分为氯丁橡胶、氟橡胶、丁晴橡胶等,完全可以满足不同用户的要求。
体积小重量轻:由于采用了行星摆线传动结构,故使泵型获得小尺寸如与同类型泵来比较,其体积重量均下降一半左右。
泵体介质流经部份,可根据用户要求,分为铸铁、不锈钢、衬胶、电机分为普通式、防爆式、变频式、电磁调速式,该泵正应用在下列场合。

Germany Kaysen imported electric diaphragm pump overview:

Germany Kaysen imported electric diaphragm pump adopts cycloidal pinwheel reducer transmission, which drives the double diaphragm to reciprocate through the crank slider mechanism, so that the working chamber volume changes alternately to achieve continuous suction and discharge of liquid. In recent years, due to Breakthrough progress has been made in diaphragm materials, and diaphragm pumps are widely used in petrochemical, ceramic, metallurgical and other industries. The diaphragm pump is characterized by no need to irrigate water, strong self-priming ability and low noise. The transported medium and the transmission mechanism are separated directly, so the medium will never leak out. Moreover, the pump itself has no shaft liquid seal and the service life is greatly extended. Application field: The diaphragm pump in the paint and ceramic industry has occupied an absolute dominant position; environmental protection, wastewater treatment, construction, sewage, fine chemicals are expanding its market share and have irreplaceable status as other pumps.


The main advantage:

● No need to irrigate water, self-priming capacity of more than 7 meters.

● Through good performance, particles, mud, etc. with a diameter of less than 10 mm can be passed without difficulty.

● Since the diaphragm will be separated by the conveying medium and the transmission mechanism, the medium will never leak out. Moreover, the pump itself has no shaft seal and the service life is greatly extended. According to different media, the diaphragm is divided into neoprene rubber, fluoro rubber, nitrile rubber, etc., which can fully meet the requirements of different users.

● Small size and light weight: Due to the use of the planetary cycloidal transmission structure, the pump type is obtained in a small size, such as compared with the same type of pump, its volume and weight are reduced by about half.

●The pump medium flows through the part, which can be divided into cast iron, stainless steel, rubber lined, motor divided into common type, explosion-proof type, frequency conversion type and electromagnetic speed control type according to user requirements. The pump is used in the following occasions.

Germany  Kaysen imported pneumatic diaphragm pump overview

The pneumatic diaphragm pump is currently the most innovative type of pump in the industry.

The pneumatic diaphragm pump uses compressed air as the power source. For various corrosive liquids, liquid with particles, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.

The pump body is made of four materials, aluminum alloy, cast iron, engineering plastics and stainless steel. NBR, neoprene, fluororubber, and polytetrafluoroethylene are used according to different liquid media. To meet the needs of different users.


main feature:

The pneumatic diaphragm pump does not need to be irrigated, the suction stroke is up to 5m, the product lift can reach 70 meters, the outlet pressure is ≥7kgf/cm2; the flow is spacious, the pass performance is good, and the maximum particle diameter is allowed to reach 10mm. When the mud and impurities are pumped, the pump wears little; the lift and flow can be adjusted steplessly by the valve opening (the air pressure is adjusted between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium does not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and harm to personal safety; it does not need electricity, it is safe and reliable to use in flammable and explosive places; it can be submerged in the medium;

Easy to use, reliable in operation, easy to open and close, only need to open and close the gas valve, even if there is no medium running or sudden stop due to unexpected circumstances, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will not be overloaded. Automatic stop, self-protection performance, when the load returns to normal, there is automatic start-up operation; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the medium conveyed by the pump will not be in contact Valves, linkages and other moving parts, unlike other types of pumps, the performance of the rotor, pistons, gears, blades and other components wear down gradually; can transport a more viscous liquid (viscosity below 10,000 centipoise); The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pneumatic stainless steel diaphragm pump.




位于Schw?bischGmünd的凯森Kaysen泵业有限公司是*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持 各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。
凯森始终坚持“重质量,讲信誉”为宗旨。产品现 全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

进口电动隔膜泵 进口隔膜泵304316