1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2019-10-11 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 气动 介质温度: 250 ℃
工作压差: 0 适用介质:
压力环境: 常压 货号: KS5987563
用途: 化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。 外型尺寸:

进口氟塑料气动隔膜泵-进口气动隔膜泵-德国KAYSEN泵业

GERMANY KAYSEN PUMP CO .,LTD

气动隔膜泵是一种新型输送机械,是目前业内比较新颖的一种泵类。采用压缩空气为动力源,对于各种腐蚀性液体,带颗粒的液体,高粘度、易挥发、易燃、剧毒的液体,均能予以抽光吸尽。目前已形成系列化生产,共有八种规格直径:φ10mm(3/8'')、φ15mm(1/2'')、φ25mm(1'')、φ40mm(11/2'')、φ50mm(2'')、φ65mm(21/2'')、φ80mm(3'')、φ100mm(4'')。四种材质:铝合金、铸铁、不锈钢、工程塑料。隔膜泵根据不同液体介质分别采用丁晴橡胶、氯丁橡胶、氟橡胶、聚四氟乙烯隔膜。以满足不同用户的需要。

主要特点:

该泵无旋转部件,不会造成环境污染和危害人身安全。

不必用电,在易燃、易爆场所使用安全可靠。

可输送较粘的液体。(粘度在1万厘泊以下)

本泵无须用油润滑,即使空转,对泵也无任何影响,这是该泵一大特点。

气动隔膜泵既能抽送流动的液体,又能输送一些不易流动的介质,具有自吸泵、潜水泵、屏蔽泵、泥浆泵和杂质泵等输送机械的许多优点。

不需要灌引水,吸程高达7m,扬程达50m,出口压力不小于6kgf每平方厘米。

流动宽蔽,通过性能好,允许通过*颗粒。直径达10mm抽送泥浆、杂质时,对泵磨损极小。

扬程、流量可通过气阀开度实现无级调节。(气压调节在2-8kg/平方厘米)


主要优点:

噪音底

震动小

使用寿命长

永不死机

做工精细

主要应用

矿井、坑道、隧道、选矿、矿渣中的积水。泵吸水泥灌浆及灰浆。

隔膜泵泵吸各种橡胶浆。

气动隔膜泵作为各种固液体分离设备的前级送压装置。

塑料气动隔膜泵可以吸花生酱、泡菜、土豆泥、小红肠、果酱苹果浆、巧克力等。

塑料气动隔膜泵可以用于吸油漆、树胶、颜料。

吸各种污水。

气动隔膜泵可以用于为油轮,驳船清仓吸取仓内污水。

吸啤酒花及发酵粉稀浆、糖浆、糖密。

粘合剂和胶水、全部种类可用泵吸取。

气动隔膜泵可以吸各种磨料、腐蚀剂、石油及泥浆、清洗油垢及一般容器。

可以吸各种剧毒、易燃、易挥发液体。

各种强酸、强碱、强腐蚀液体。

吸各种高温液体*可耐150度。

各种瓦、瓷、砖器及陶器釉浆。

油井钻好后,用气动隔膜泵吸沉积物及灌浆。

吸各种乳剂和填料。

The pneumatic diaphragm pump is a new type of conveying machine, which is a relatively new type of pump in the industry. Compressed air is used as the power source. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. At present, serial production has been formed, with a total of eight specifications diameter: φ10mm (3/8''), φ15mm (1/2''), φ25mm (1''), φ40mm (11/2''), φ50mm (2 ''), φ65mm (21/2''), φ80mm (3''), φ100mm (4''). Four materials: aluminum alloy, cast iron, stainless steel, engineering plastics. The diaphragm pump uses nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene diaphragm according to different liquid media. To meet the needs of different users.


main feature:

●The pump has no rotating parts and will not cause environmental pollution and personal safety.

●It is not necessary to use electricity, and it is safe and reliable to use in flammable and explosive places.

● It can transport a relatively viscous liquid. (viscosity below 10,000 centipoise)

●The pump does not need to be lubricated with oil. Even if it is idling, it has no effect on the pump. This is a major feature of the pump.

●The pneumatic diaphragm pump can pump both flowing liquid and some non-flowing medium. It has many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump.

● No need to irrigate water, the suction stroke is up to 7m, the lift is up to 50m, and the outlet pressure is not less than 6kgf per square centimeter.

● Flowable cover, good performance, allowing the passage of the largest particles. When pumping mud and impurities up to 10mm in diameter, the pump wear is minimal.

●The head and flow can be adjusted steplessly through the valve opening. (Pneumatic pressure is adjusted at 2-8kg/cm 2 )


The main advantage:

● noise floor

●Small vibration

●Long service life

● Never crash

●Working fine


main application:

● Water in mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.

●The diaphragm pump pumps all kinds of rubber slurry.

●Pneumatic diaphragm pump is used as the front stage pressure supply device for various solid liquid separation equipment.

●Plastic pneumatic diaphragm pump can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.

●Plastic pneumatic diaphragm pump can be used to absorb paint, gum and pigment.

● Suction all kinds of sewage.

●Pneumatic diaphragm pump can be used to pick up the sewage in the tank for the tanker and barge clearance.

●Suck hops and fermented powder slurry, syrup and sugar.

●Adhesives and glues, all types can be pumped.

●Pneumatic diaphragm pump can absorb all kinds of abrasives, corrosives, oil and mud, cleaning grease and general containers.

● Can absorb a variety of highly toxic, flammable, volatile liquids.

● A variety of strong acids, strong alkalis, strong corrosive liquids.

●It can withstand up to 150 degrees of high temperature liquid.

●All kinds of tiles, porcelain, bricks and pottery glaze.

● After drilling the oil well, pump the sediment and grout with a pneumatic diaphragm.

● Aspirate various emulsions and fillers.

Cast steel pneumatic diaphragm pump

Stainless steel pneumatic diaphragm pump

Fluoroplastic pneumatic diaphragm pump

Pneumatic powder pump

Sanitary diaphragm pump

           位于德国Schw?bischGmünd的凯森Kaysen泵业有限公司是世界*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“德国制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。

        德国凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.