1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2019-10-11 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 电动 介质温度: 250 ℃
工作压差: 0 适用介质:
压力环境: 常压 货号: KS5893359
用途: 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。 外型尺寸:

进口高压柱塞泵-进口柱塞泵-德国KAYSEN泵业

GERMANY KAYSEN PUMP CO .,LTD

高压柱塞泵的使用压力一般应在10MPa~100MPa之间。它属于容积式泵,借助工作腔里的容积周期性变化来达到输送液体的目的;原动机的机械能经泵直接转化为输送液体的压力能;泵的容量只取决于工作腔容积变化值及其在单位时间内的变化次数,理论上与排出压力无关。往复泵是借助于活塞在液缸工作腔内的往复运动(或通过隔膜、波纹管等挠性元件在工作腔内的周期性弹性变形)来使工作腔容积产生周期性变化的。在结构上,往复泵的工作腔是借助密封装置与外界隔开,通过泵阀(吸入阀和排出阀)与管路沟通或闭合。

主要特点:

瞬时流量是脉动的

这是因为在柱塞泵中,液体介质的吸入和排出过程是交替进行的,而且活塞在位移过程中,其速度又在不断地变化之中。在只有一个工作腔的泵中,泵的瞬时流量不仅随时间而变化,而且是不连续的。随着工作腔的增多,瞬时流量的脉动幅度越来越小,乃至在实用上可以认为是紊流。

平均流量是恒定的

理论上,泵的流量只取决于泵的主要结构参数 n(每分钟往复次数)、S(活塞行程)、D(活塞直径)、Z(活塞数目),与排出压力无关,且与输送介质的温度、粘度等物理、化学性质无关。所以说泵的流量是恒定的。

泵的压力取决于管道特性

柱塞泵的排出压力不能由泵本身限定,而是取决于泵装置的管道特性,并且与流量无关。也就是说,如果认为输送液体是不可压缩的,那么,在理论上可认为往复泵的排出压力将不受任何限制,即可根据泵装置的管道特性,建立泵的任何所需的排出压力。当然,所有往复泵都有一个泵的排出压力的规定,这不是说该泵的排出压力不会再升高,而只是说,由于原动机额定功率和泵本身的结构强度的限制,不允许在超出这一排出压力下使用而己。

对输送介质有较强的适应性

柱塞泵原则上可以输送任何介质,几乎不受介质的物理性能和化学性能的限制。当然,由于液力端的材料和制造工艺以及密封技术的限制,有时也会遇到不能适应的情况。

有良好的自吸性能

柱塞泵不仅有良好的吸入性能,而且还有良好的自吸性能。因此,对多数往复泵来说,在启动前通常不需灌泵。 机器效率高,节能。

主要优点:

效率高

耐压高

寿命长

传输功率大

转速范围宽

有良好的自吸性能

主要应用:

重型刨床

液压机

工程机械

船舶

矿山冶金机械

能源矿山开采

石油精细化工

食品药品加工





The working pressure of the high pressure piston pump should generally be between 10 MPa and 100 MPa. It belongs to a positive displacement pump, and the purpose of conveying liquid is achieved by the periodic change of the volume in the working chamber; the mechanical energy of the prime mover is directly converted into the pressure energy of the liquid by the pump; the capacity of the pump depends only on the volume change of the working chamber and The number of changes in unit time is theoretically independent of the discharge pressure. The reciprocating pump periodically changes the working chamber volume by means of the reciprocating motion of the piston in the working chamber of the liquid cylinder (or periodic elastic deformation in the working chamber by flexible elements such as diaphragms and bellows). Structurally, the working chamber of the reciprocating pump is separated from the outside by means of a sealing device, and communicates or closes with the pipeline through the pump valve (suction valve and discharge valve).


main feature:


● Instantaneous flow is pulsating

This is because in the plunger pump, the suction and discharge processes of the liquid medium alternate, and the speed of the piston is constantly changing during the displacement process. In a pump with only one working chamber, the instantaneous flow of the pump not only changes over time, but is also discontinuous. As the working chamber increases, the amplitude of the pulsation of the instantaneous flow becomes smaller and smaller, and even practically, it can be considered as turbulent flow.

●The average flow is constant

In theory, the pump flow depends only on the pump's main structural parameters n (reciprocation times per minute), S (piston stroke), D (piston diameter), Z (number of pistons), independent of discharge pressure, and with the transport medium. Physical and chemical properties such as temperature and viscosity are irrelevant. So the pump flow is constant.

●The pressure of the pump depends on the characteristics of the pipe

The discharge pressure of the plunger pump cannot be defined by the pump itself, but depends on the piping characteristics of the pump unit and is independent of the flow rate. That is to say, if the delivery liquid is considered to be incompressible, then it is theoretically considered that the discharge pressure of the reciprocating pump will not be unduly limited, and any desired discharge pressure of the pump can be established depending on the piping characteristics of the pump device. Of course, all reciprocating pumps have a discharge pressure regulation of the pump. This is not to say that the discharge pressure of the pump will not rise any more, but only because of the limitation of the prime mover's rated power and the structural strength of the pump itself, it is not allowed. Use it beyond this discharge pressure.

● Strong adaptability to the transport medium

In principle, the plunger pump can transport any medium, virtually independent of the physical and chemical properties of the medium. Of course, due to the limitations of the material and manufacturing process of the hydraulic end and the sealing technology, sometimes it is difficult to adapt.

●Good self-priming performance

The plunger pump not only has good suction performance, but also has good self-priming properties. Therefore, for most reciprocating pumps, there is usually no need to prime the pump before starting. The machine is efficient and energy efficient.


The main advantage:

●High efficiency

●High pressure resistance

●Long life

●High transmission power

● Wide speed range

●Good self-priming performance


main application:

●Heavy planer

●Hydraulic machine

●Engineering machinery

●Ship

●Mine metallurgical machinery

●Energy mining

●Petroleum Fine Chemicals

●Food and drug processing


       位于德国Schw?bischGmünd的凯森Kaysen泵业有限公司是世界*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“德国制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。

        德国凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.