1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2019-10-12 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 电动 介质温度: 250 ℃
工作压差: 0 适用介质:
压力环境: 常压 货号: KS8369679
用途: 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。 外型尺寸:

进口容积泵-进口转子泵-德国KAYSEN泵业

GERMANY KAYSEN PUMP CO .,LTD

利用泵缸内容积的变化来输送液体的泵。
往复泵:
往复泵是利用活塞的往复运动来输送液体的泵,靠活塞的往复运动将能量直接以静压能的形式传送液体。由于液体是不可压缩的,所以在活塞压送液体时,可以使液体承受很高的压强,从而获得很高的扬程。
转子泵:
转子泵由静止的泵壳和旋转的转子组成,它没有吸入阀和排出阀,靠泵体内的转子与液体接触的一侧将能量以静压力形式直接作用于液体,并借旋转转子的挤压作用排出液体,同时在另一侧留出空间,形成低压,使液体连续吸入。转子泵的压头较高,流量通常较小,排液均匀,适用于输送粘度高,具有润滑性,但不含固体颗粒的液体。类型有齿轮泵、螺杆泵、滑片泵,挠性叶轮泵、罗茨泵、旋转活塞泵等,其中齿轮泵和螺杆泵是最常见的转子泵。
 

主要特点:

具有离心泵运转的平稳性,无噪声(仅听到电机声),无漏油现象,不需污油回收装置及水冷却等附属设备; 
具有容积式泵效率高的特点,且压力变化时排量恒定(定速); 
泄漏点少、维护量小、维修费用低、维修时间短,但是螺杆泵主要用于输送高粘度的油品,输送稀油的效率比较低,且出口压力不能过高,否则内漏增加,影响泵的安全使用,同时螺杆泵对流量的变化适应差,对于流量变化大的管道需要设置变频器等额外设备来调整泵流量。


主要应用:
适用介质有汽油、柴油、煤油,还有专门设计特殊介质中使用的潜油泵,如100%甲醇、100%乙醇、超过15%甲醇汽油、异丙醇、乙酸乙酯、甲苯等。




Rotor pump

Emulsifying pump

Positive displacement pump



A pump that delivers liquid using changes in the internal volume of the pump cylinder.

Reciprocating pump:

A reciprocating pump is a pump that uses a reciprocating motion of a piston to deliver liquid. The reciprocating motion of the piston transfers energy directly in the form of static pressure energy. Since the liquid is incompressible, the liquid can be subjected to a high pressure when the piston is pumping the liquid, thereby obtaining a high lift.

Rotor pump:

The rotor pump consists of a stationary pump casing and a rotating rotor. It has no suction valve and discharge valve. The side of the pump body that is in contact with the liquid in the pump body directly applies energy to the liquid in the form of static pressure, and is squeezed by the rotating rotor. The action discharges the liquid while leaving space on the other side to form a low pressure for continuous inhalation of the liquid. The rotor pump has a high pressure head, a small flow rate and a uniform discharge. It is suitable for conveying liquids with high viscosity and lubricity but no solid particles. Types include gear pumps, screw pumps, vane pumps, flexible impeller pumps, Roots pumps, rotary piston pumps, etc. Among them, gear pumps and screw pumps are the most common rotor pumps.

 


main feature:


●It has the smoothness of the operation of the centrifugal pump, no noise (only the sound of the motor is heard), no oil leakage, no need for auxiliary equipment such as sewage recovery device and water cooling;

●It has the characteristics of high efficiency of volumetric pump, and the displacement is constant when the pressure changes (fixed speed);

●Low leakage point, low maintenance, low maintenance cost and short maintenance time, but the screw pump is mainly used to transport high viscosity oil. The efficiency of conveying thin oil is relatively low, and the outlet pressure can not be too high, otherwise the internal leakage will increase. It affects the safe use of the pump, and the screw pump adapts to the change of the flow rate. For the pipeline with large flow change, additional equipment such as frequency converter is needed to adjust the pump flow.



main application:

Applicable mediums include gasoline, diesel, kerosene, and submersible pumps specially designed for use in special media, such as 100% methanol, 100% ethanol, more than 15% methanol gasoline, isopropanol, ethyl acetate, toluene, etc.

       位于德国Schw?bischGmünd的凯森Kaysen泵业有限公司是世界*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“德国制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。

        德国凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.