1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2020-03-12 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 电动 介质温度: 250 ℃
工作压差: 适用介质:
压力环境: 常压 货号:
用途: 外型尺寸:

进口节能衬氟磁力泵(上海办事处)

GERMANY KAYSEN


信任对德国KAYSEN至关重要,德国凯森泵业有限公司是环保机械的专业制造销售现代化企业,技术力量雄厚,生产检验设备先进、管理方法科学、产品质量可靠、售后服务完善。


我们竭诚欢迎各国朋友的多种方式合作,不拘形式,平等互利,共谟环境保护的崇高事业。


主要优点:


衬氟磁力泵的过流部件全部采用目前世界上耐腐蚀性能*秀“塑料王”制造,隔离套采用特殊材料制造,具有高强度的力学性能,消除了普通磁力泵存在的磁涡流现象。因此,氟塑料磁力泵可输送任意浓(强)度的酸、碱、氧化剂等腐蚀性介质而毫不受损。

优势就是采用内外磁力间接驱动,完全取消了传统离心式泵的轴封,内外磁之间采用不锈钢套与氟塑料材质的隔离套完全隔离,从而真正达到了零泄漏输送,对于输送易燃、易爆、易挥发及贵重的液体输送更为放心,真正避免了使用过程中的维护工作。




The main advantage:


The flow-through parts of the fluorine-lined magnetic pump are all made of the world's most corrosion-resistant "plastic king". The isolation sleeve is made of special materials. It has high mechanical strength and eliminates the eddy current phenomenon of ordinary magnetic pumps. Therefore, the fluoroplastic magnetic pump can transport corrosive media such as acids, alkalis, oxidants, etc., without any damage.

The advantage is that the internal and external magnetic force is used to indirectly drive, and the shaft seal of the traditional centrifugal pump is completely eliminated. The stainless steel sleeve and the fluoroplastic isolation sleeve are completely isolated between the internal and external magnetics, thereby achieving zero leakage transmission. Explosive, volatile and valuable liquid transportation is more assured, and maintenance work during use is truly avoided.


主要应用:


染料

化工


电镀

国防


食品

科研机构


制药

冶金

石油



main application:


Dye


Chemical


Plating


National defense


Food


Research institutions


Pharmaceuticals


metallurgy


Petroleum


磁力泵使用注意事项:


 禁止空运转。磁力泵使用过程切忌不能无液体运输转(假如泵浦内无液体,会使泵浦的轴受轴承温度升高现象,导致泵浦烧坏损毁)


 磁力泵没有自吸功能,因此泵的进口要低于液位面工作时确保进水口有水压便能稳定工作。启动后需把泵体之内灌满所抽介质,排出空气,并且保证抽入与吸出口阀门全部作为开启状态。


 如无压力、流量时,启动电机,试看电机转向有没有反转(电机风罩有转向标识)。


 尽量使磁力泵的流量与扬程在标牌之上标明的范围之内,以此确保磁力泵于*效率点运行,便能取得*的节能效果。


 磁力泵在使用过程中电机要避免防水措施,以免电机进水烧坏或是电机生锈,影响使用。


 保养人员应周期检查磁力泵管路以及结合处缺水或是螺纹松动现象。


 检查磁力泵有振动或声音大应立刻检验原因检修。


 磁力泵要停止使用时,先行关闭电机,接着关闭阀门、再关闭压力表。


 定期检查轴承、密封圈的磨损情况,磨损比较大应立即更换新的。


 磁力泵在冬季节使用时,停止后,需将泵体外部介质放净。避免冻裂。


 磁力泵长年停用,需将泵全部拆开,擦干水分。


Precautions for use of magnetic pump:


Do not run dry. The magnetic pump must not be transported without liquid during use (if there is no liquid in the pump, the pump shaft will be subject to the bearing temperature rising phenomenon, causing the pump to burn and damage)


The magnetic pump has no self-priming function, so when the pump inlet is lower than the liquid level surface, make sure that the water inlet has stable water pressure. After start-up, the pump body must be filled with the pumped medium and exhausted, and the pumping and suction outlet valves must be kept open.


If there is no pressure or flow, start the motor and see if the motor's direction of rotation is reversed (the motor hood has a direction mark).


Try to keep the flow and head of the magnetic pump within the range indicated on the label, so as to ensure that the magnetic pump operates at the highest efficiency point, and the maximum energy saving effect can be achieved.


During the use of the magnetic pump, the motor should be protected against water, so as to prevent the motor water from being burned or the motor rusting, which will affect the use.


Maintenance personnel should periodically check the magnetic pump pipeline and the joint for water shortage or loose threads.


Check the magnetic pump for vibration or loud sound. Check the cause and repair immediately.


When the magnetic pump is to be stopped, turn off the motor first, then close the valve, and then close the pressure gauge.


Regularly check the wear of bearings and seals. If the wear is relatively large, replace it with a new one immediately.


When the magnetic pump is used in the winter season, after stopping, the external medium of the pump body must be cleaned. Avoid frost cracking.


The magnetic pump has been out of service for many years. It is necessary to disassemble the pump and wipe off the water.


我们的优势

Our advantage


我们的服务

our service


售后服务:在购买德国KAYSEN泵业品之前我们将为您提供详细的产品介绍使用说明及性能参数等资料,并根据您的使用要求为您提供*的选型及选择机会。


技术支持:德国KAYSEN泵业为您提供多方面的技术资料服务,除可在电话中咨询外,我们还可根据您的需求提供与您所购产品有关的*日常使用说明及产品维护资料。


安装使用:按您的实际使用情况由德国KAYSEN泵业的专业技术人员为您指导安装、调试,以确保德国KAYSEN泵业产品在使用中安全可靠,为使您能掌握更全面、更科学的产品使用方法,我们将为您提供及时的人员培训服务。


After-sales service: Before purchasing German KAYSEN pump products, we will provide you with detailed product introduction, usage instructions and performance parameters, and provide you with the best selection and selection opportunities according to your requirements.


Technical support: Germany KAYSEN pump industry provides you with a variety of technical information services. In addition to consulting on the phone, we can also provide the latest daily use instructions and product maintenance information related to your purchased products according to your needs.


Installation and use: According to your actual use, professional technicians from Germany KAYSEN Pumps will guide you to install and debug to ensure that German KAYSEN Pumps products are safe and reliable in use, so that you can master more comprehensive and scientific Product use methods, we will provide you with timely personnel training services.