1
起批量(台) 价格
0 面议
供货能力: 电议 最低订购量: 1台
可销售总数量: 1000台
发布日期: 2020-07-16 更新日期: 2020-11-12
品牌: 德国KAYSEN 型号: KAYSEN
驱动方式: 气动 介质温度: 250 ℃
工作压差: 适用介质:
压力环境: 常压 货号:
用途: 水、化工、食品、颜料等 外型尺寸:

进口塑料气动隔膜泵


“ KAYSEN是工业行业的可靠解决方案合作伙伴,并且是化学液处理的组件和系统的制造商。基于我们的创新产品,服务和针对特定行业的解决方案,我们为全球客户提供了更高的效率和安全性。”

"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."

进口塑料气动隔膜泵——上海总代理


我们的目标

为客户提高效率和安全性


我们在全球的市场水处理和化学流体处理


我们的报价 

组件,系统,服务和行业特定的解决方案


我们的价值

可靠性

革新

解决方案驱动

全球


Imported pneumatic diaphragm pump——Shanghai distributor


Our goal


Improve efficiency and safety for customers

Our global market water treatment and chemical fluid treatment


Our offer


Components, systems, services and industry-specific solutions



Our value


reliability


innovation


Solution driven


global



德国KAYSEN凯森进口塑料气动隔膜泵概述

气动隔膜泵是一种新型输送机械,是目前业内比较新颖的一种泵类。采用压缩空气为动力源,对于各种腐蚀性液体,带颗粒的液体,高粘度、易挥发、易燃、剧毒的液体,均能予以抽光吸尽。目前已形成系列化生产,共有八种规格直径:φ10mm(3/8'')、φ15mm(1/2'')、φ25mm(1'')、φ40mm(11/2'')、φ50mm(2'')、φ65mm(21/2'')、φ80mm(3'')、φ100mm(4'')。四种材质:铝合金、铸铁、不锈钢、工程塑料。隔膜泵根据不同液体介质分别采用丁晴橡胶、氯丁橡胶、氟橡胶、聚四氟乙烯隔膜。以满足不同用户的需要。

主要特点:

该泵无旋转部件,不会造成环境污染和危害人身安全。

不必用电,在易燃、易爆场所使用安全可靠。

可输送较粘的液体。(粘度在1万厘泊以下)

本泵无须用油润滑,即使空转,对泵也无任何影响,这是该泵一大特点。

气动隔膜泵既能抽送流动的液体,又能输送一些不易流动的介质,具有自吸泵、潜水泵、屏蔽泵、泥浆泵和杂质泵等输送机械的许多优点。

不需要灌引水,吸程高达7m,扬程达50m,出口压力不小于6kgf每平方厘米。

流动宽蔽,通过性能好,允许通过*颗粒。直径达10mm抽送泥浆、杂质时,对泵磨损极小。

扬程、流量可通过气阀开度实现无级调节。(气压调节在2-8kg/平方厘米)


主要优点:

噪音底

震动小

使用寿命长

永不死机

做工精细

主要应用

矿井、坑道、隧道、选矿、矿渣中的积水。泵吸水泥灌浆及灰浆。

隔膜泵泵吸各种橡胶浆。

气动隔膜泵作为各种固液体分离设备的前级送压装置。

塑料气动隔膜泵可以吸花生酱、泡菜、土豆泥、小红肠、果酱苹果浆、巧克力等。

塑料气动隔膜泵可以用于吸油漆、树胶、颜料。

吸各种污水。

气动隔膜泵可以用于为油轮,驳船清仓吸取仓内污水。

吸啤酒花及发酵粉稀浆、糖浆、糖密。

粘合剂和胶水、全部种类可用泵吸取。

气动隔膜泵可以吸各种磨料、腐蚀剂、石油及泥浆、清洗油垢及一般容器。

可以吸各种剧毒、易燃、易挥发液体。

各种强酸、强碱、强腐蚀液体。

吸各种高温液体*可耐150度。

各种瓦、瓷、砖器及陶器釉浆。

油井钻好后,用气动隔膜泵吸沉积物及灌浆。

吸各种乳剂和填料。



Germany Kaysen imported plastic pneumatic diaphragm pump overview


Pneumatic diaphragm pump is a new type of conveying machinery and a relatively new type of pump in the industry. Using compressed air as the power source, all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. At present, series production has been formed. There are eight specifications of diameters: φ10mm (3/8''), φ15mm (1/2''), φ25mm (1''), φ40mm (11/2''), φ50mm (2 ''), φ65mm (21/2''), φ80mm (3''), φ100mm (4''). Four materials: aluminum alloy, cast iron, stainless steel, engineering plastics. Diaphragm pumps use nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene diaphragms according to different liquid media. To meet the needs of different users.


main feature:

●The pump has no rotating parts, which will not cause environmental pollution and endanger personal safety.

●It is safe and reliable to use in flammable and explosive places without electricity.

●Can transport viscous liquid. (Viscosity below 10,000 centipoise)

●This pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump. This is a major feature of this pump.

●Pneumatic diaphragm pump can not only pump flowing liquid, but also transport some medium that is not easy to flow. It has many advantages such as self-priming pump, submersible pump, canned pump, mud pump and impurity pump.

● No need to irrigate and draw water, the suction stroke is up to 7m, the lift is up to 50m, and the outlet pressure is not less than 6kgf per square centimeter.

● Wide flow shielding, good passing performance, allowing the largest particles to pass. When pumping mud and impurities with a diameter of up to 10mm, the pump will wear very little.

●The head and flow can be adjusted steplessly through the opening of the air valve. (The air pressure is adjusted to 2-8kg/cm2)


main advantage:

● Noise floor

●Small vibration

●Long service life

● Never crash

● Fine workmanship


main application:

●Water accumulation in mines, tunnels, tunnels, beneficiation and slag. Pumping cement grouting and mortar.

●The diaphragm pump pumps various rubber slurries.

●Pneumatic diaphragm pump is used as the front-stage pressure sending device of various solid-liquid separation equipment.

●Plastic pneumatic diaphragm pump can suck peanut butter, kimchi, mashed potatoes, small red sausage, jam, apple jam, chocolate, etc.

●Plastic pneumatic diaphragm pump can be used to absorb paint, gum and paint.

●Suction all kinds of sewage.

●Pneumatic diaphragm pump can be used to clean the tanker and barge to absorb the sewage in the tank.

●Sucker hops and baking powder slurry, syrup, syrup.

●Adhesive and glue, all types can be sucked by pump.

●Pneumatic diaphragm pump can suck all kinds of abrasives, corrosives, petroleum and mud, clean grease and general containers.

●Can absorb all kinds of highly toxic, flammable and volatile liquids.

●Various strong acids, strong bases, strong corrosive liquids.

● Absorb various high-temperature liquids up to 150 degrees.

●Various tile, porcelain, brick and pottery glaze slurry.

●After the oil well is drilled, use pneumatic diaphragm pump to suck sediment and grouting.

●Suck various emulsions and fillers.


关于Kaysen


我们的基础

KAYSEN全球成功故事的基础是数十年来的工程专业知识,对应用的深刻理解和不断创新的高质量产品。因此,该公司集团不断投资于研发。KAYSEN在全球12个生产基地中也具有高度的垂直整合,从而确保为客户提供*的质量水平,并确保我们不受供应商市场波动的影响。


我们的宗旨

集成在精心设计的解决方案中的模块化KAYSEN系列,使我们各行各业的客户可以随时随地在其生产过程中实现*的安全性和效率。

对我们而言,与客户的亲近意味着与客户一起寻找适合个人需求的正确解决方案。个人,实用的建议和流畅的项目处理与我们全球客户服务一样,都是我们提供的服务的一部分。


我们的承诺

我们热情地致力于为每个客户选择合适的泵,可持续且具有成本效益的解决方案。

在90多个国家/地区,我们自己的销售,生产和服务公司的大约3,500名员工每天都在努力为每种产品提供快速可靠的服务。由于KAYSEN泵业作为全球市场*的地位,意味着对*产品和服务的持续承诺以及对负责任的思维和行动的义务。


Our foundation

KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.


Our aim

The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.


For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.


Our promise

We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.


In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.