"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
Imported pneumatic diaphragm pump——Shanghai distributor
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Components, systems, services and industry-specific solutions
Germany Kaysen imported stainless steel pneumatic diaphragm pump overview
Stainless steel pneumatic diaphragm pump is currently the most novel type of pump in China. All kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids can be exhausted.
The stainless steel pneumatic diaphragm pump uses compressed air as the power source. It can exhaust all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastic, and stainless steel. According to different liquid media, nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene are used. To meet the needs of different users.
●Can be immersed in the medium to work
● No irrigation and diversion. Suction up to 5m. The lift is up to 50m. Outlet pressure ≥6kgf/c㎡
● No electricity is required. Safe and reliable use in flammable and explosive places
●This pump does not need to be lubricated with oil, even if it is idling. Has no effect on the pump, this is the biggest feature of the pump
●It is spacious and has good passing performance. The maximum particle diameter allowed to pass is 10mm. When pumping mud and impurities, there is little wear on the pump
●The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure is adjusted between 1-7 bar)
●The pump has no rotating parts, no shaft seal, and the pumped medium such as the diaphragm j| is completely separated from the moving parts of the pump and the workpiece medium, and the transported medium will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety
●Simple structure, few wearing parts, simple structure of the pump, easy installation and maintenance, the medium conveyed by the pump will not contact the moving parts such as valve, connecting rod, etc. Unlike other types of pumps due to rotor, piston, gear, The performance of the blade and other components is gradually reduced
●Easy to use, reliable in operation, simply open and close the gas valve to start and stop. Even if there is no medium running for a long time or the pump is suddenly stopped due to unexpected conditions, it will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance, when the load returns to normal, it can automatically start running
● Noise floor
● Never crash
● Fine workmanship
●Suction all kinds of sewage.
●Suck various emulsions and fillers.
●Various strong acids, strong bases, strong corrosive liquids.
● Absorb various high-temperature liquids up to 150 degrees.
●It can suck peanut butter, kimchi, mashed potatoes, small red intestine, apple jam, chocolate, etc.
●Can be used to absorb paint, gum, pigment.
●Adhesive and glue, all types can be sucked by pump.
●Various tile, porcelain, brick and pottery glaze slurry.
●After the oil well is drilled, use pneumatic diaphragm pump to suck sediment and grouting.
●Stainless steel diaphragm pump pumps various rubber slurries.
●Pneumatic diaphragm pump can be used to clean the tanker and barge to absorb the sewage in the tank.
●Sucker hops and baking powder slurry, syrup, syrup.
●Water accumulation in mines, tunnels, tunnels, beneficiation and slag. Pumping cement grouting and mortar.
●Stainless steel pneumatic diaphragm pump can suck various abrasives, corrosives, petroleum and mud, clean grease and general containers.
●Can absorb all kinds of highly toxic, flammable and volatile liquids.
●Stainless steel pneumatic diaphragm pump is used as the front-stage pressure sending device of various solid-liquid separation equipment.
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.