进口塑料泵(德国进口)品牌

进口塑料泵(德国进口)品牌

产品介绍:

塑料泵()品牌Germany imported plastic pumpKAYSEN泵业中国总代理:营派阀门(上海)有限公司Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.电话:021-51860957 吕8 Manager Lv Mob...


  • 物品单位:
  • 品牌: 德国凯森KAYSEN品牌

产品详细说明

品牌 德国凯森KAYSEN品牌
连接形式 法兰
材质 铸铁、不锈钢、铝合金、氟堕料
型号 KAYSEN
工作压差 0
适用范围 水、污水、石油、化工、电子、饮料、食品
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质

塑料泵()品牌

Germany imported plastic pump


KAYSEN泵业中国总代理:营派阀门(上海)有限公司

Germany Kaysen Pumps China Distributor: Camper Valves (Shanghai) Co., Ltd.

电话:021-51860957   8

     Manager Lv Mobile number: 15800827238

KAYSEN凯森口塑料泵概述:

Germany imported plastic pump
塑料泵是凯森在离心泵的基础上,采用磁力耦合实现力矩的无接触传递,是无轴封、全密封、无泄漏、耐腐蚀、无污染的新型环保型卧式离心泵。
塑料泵的选材
工程塑料是指被用做工业零件或外壳材料的工业用塑料,是强度、耐冲击性、耐热性、硬度及抗老化性均优的塑料。工程塑料泵是指用这些材料制作的,有特殊的物理、化学性能,可以满足不同工业要求的产品。
常用的材料
1. 热性质:玻璃转移温度(Tg)及熔点(Tm);热变形温度(HDT)高;长期使用温度高(UL-746B);使用温度范围大;热膨胀系数小。
2. 机械性质:高强度、高机械模数、低潜变性、强耐磨损及耐疲劳性。
3. 其它:耐化学药品性、抗电性、耐燃性、耐候性、尺寸安定性佳。
工程塑料的结构
被当做通用性工程塑料者包括聚碳酸酯(PC)、聚酰胺(尼龙)、聚缩醛(POM)、变性聚苯醚(变性PPE)、聚酯(PETP,PBTP)、聚苯硫醚(PPS)、聚芳基酯,热硬化性塑料则有不饱和聚酯、酚塑料、环氧塑料等。
它们的基本特性为拉伸强度均超过50Mpa,抗拉强度在500kg/cm ,耐冲击性超过50J/m,弯曲弹性率在24000kg/cm ,负载绕曲温度超过100℃,硬度、老化性优。聚丙烯若改善其硬度和耐寒性,也可列入工程塑料的范围。此外,还包括较特殊者的强度弱、耐热耐药品性优的氟素塑料,耐热性优的硅溶融化合物,以及聚酰胺酰亚胺、聚酰亚胺、Polybismaleimide、Polysufone(PSF)、PES、丙烯塑料、变性蜜胺塑料、BTResin、PEEK、PEI、液晶塑料等。
各工程塑料的化学构造不同,所以制成的工程塑料泵的耐药品性、摩擦特性、电机特性等有所差异。由于各工程塑料的成型性不同,这样就造成了工程塑料泵应用上的局限。热硬化型工程塑料的制造的工程塑料泵耐冲击性较差,因此大多添加玻璃纤维。工程塑料除了聚碳酸酯等耐冲击性大外,通常具有硬、脆、延伸率小的性质,但如果添加20—30%的玻璃纤维,则它制成的工程塑料泵耐冲击性将有所改善。

产品优势
1、不需灌引水。吸程高达5m,扬程达70m,出口压力≥6bar。
2、流动宽敞,通过性能好,允许通过*颗粒直径达10mm。抽送泥浆、杂质时,对泵磨损甚微;
3、扬程、流量可通过气阀开度实现无级调节(气压调节在1-7 bar之间);
4、该泵无旋转部件,没有轴封,隔膜等抽送的介质与泵的运动部件、工作介质完全隔开,所输送的介质不会向外泄漏。所以抽送有毒、易挥发或腐蚀性介质时,不会造成环境污染和危害人身安全;
5、不必用电,在易燃、易爆场所使用安全可靠;
6、可以浸没在介质中工作;
7、使用方便、工作可靠、开停只需简单地打开和关闭气体阀门。即使由于意外情况而长时间无介质运行或突然停机泵也不会因此而损坏,一旦超负荷,泵会自动地停机,具有自我保护性能,当负荷恢复正常后,又能自动启动运行;
8、结构简单、易损件少,该泵结构简单,安装,维修方便,泵输送的介质不会接触到配气阀,联杆等运动部件,不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降;
9、可输送较粘的液体(粘度在1万厘泊以下);
10、本泵无须用油润滑,即使空转,对泵也无任何影响,这是该泵*特点。
塑料泵广泛应用于化工、食品、酿造、制药、电镀、造纸、环保、水 处理等部门,输送酸、碱、盐等腐蚀性液体。

The plastic pump is a German based Kaiser on the basis of the centrifugal pump, uses the magnetic coupling to realize the non-contact transmission of the torque, and is a new environment-friendly horizontal centrifugal pump without shaft seal, full sealing, no leakage, corrosion resistance and no pollution.

Plastic pump selection

Engineering plastics are industrial plastics that are used as industrial parts or housing materials. They are plastics that are excellent in strength, impact resistance, heat resistance, hardness, and aging resistance. Engineering plastic pumps are made of these materials, have special physical and chemical properties, and can meet the requirements of different industrial products.

Commonly used materials

1. Thermal properties: glass transition temperature (Tg) and melting point (Tm); high heat distortion temperature (HDT); high long-term use temperature (UL-746B); large operating temperature range;

2. Mechanical properties: high strength, high mechanical modulus, low latent denaturation, strong wear resistance and fatigue resistance.

3. Others: Good chemical resistance, electrical resistance, flame resistance, weather resistance, dimensional stability.

Structure of engineering plastics

Polyurethanes (PC), polyamide (nylon), polyacetal (POM), denatured polyphenylene ether (denatured PPE), polyester (PETP, PBTP), polyphenylene sulfide PPS), polyarylate, thermosetting plastics are unsaturated polyester, phenolic plastics, epoxy plastics and so on.

Their basic characteristics are that the tensile strength exceeds 50Mpa, the tensile strength is 500kg/cm, the impact resistance exceeds 50J/m, the bending elasticity is 24000kg/cm, the load bending temperature exceeds 100°C, and the hardness and aging properties are excellent. If polypropylene can improve its hardness and cold resistance, it can also be included in the scope of engineering plastics. In addition, it also includes weaker, more heat-resistant and chemically-resistant fluoroplastics, more heat-resistant silicon-melting compounds, and polyamideimide, polyimide, polybismaleimide, and Polysufone (PSF). , PES, acrylic, denatured melamine plastics, BTRinsin, PEEK, PEI, liquid crystal plastics, etc.

The chemical structure of each engineering plastic is different. Therefore, the chemical resistance, friction characteristics, and motor characteristics of the manufactured plastic pump vary. Due to the different formability of engineering plastics, this has caused limitations in the application of engineering plastics pumps. Since the engineering plastic pumps for the manufacture of thermosetting engineering plastics have poor impact resistance, glass fibers are often added. In addition to high impact resistance of polycarbonate and other engineering plastics, it is usually hard, brittle, and has low elongation. However, if 20-30% of glass fiber is added, the impact resistance of engineering plastic pumps made of it will be improved. improve.


Product advantages

1, no irrigation water. Suction up to 5m, head up to 70m, outlet pressure ≥ 6bar.

2, the flow is spacious, through the performance is good, allowing the maximum particle diameter of up to 10mm. When pumping mud and impurities, little wear on the pump;

3, head, flow can be achieved through the valve opening stepless adjustment (pressure adjustment between 1-7 bar);

4. The pump has no rotating parts and there is no shaft seal. The medium pumped by the diaphragm is completely separated from the moving parts and working medium of the pump, and the conveyed medium will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety;

5, do not have to use electricity, safe and reliable in flammable, explosive places;

6, can be immersed in the medium;

7, easy to use, reliable, open and stop simply open and close the gas valve. Even if the pump is not operated for a long period of time due to unexpected conditions, or if the pump is stopped suddenly, the pump will not be damaged. Once it is overloaded, the pump will automatically stop and have self-protection performance. When the load returns to normal, it can automatically start operation again.

8, the structure is simple, less wearing parts, the pump structure is simple, easy installation, maintenance, pump transmission media will not come into contact with the valve, linkage and other moving parts, unlike other types of pumps due to the rotor, piston, gear , Blades and other parts of the wear and tear to gradually reduce performance;

9, can deliver more viscous liquid (viscosity of 10,000 centipo below);

10, the pump does not need to use oil lubrication, even if idle, no effect on the pump, which is the pump's biggest feature.

Plastic pumps are widely used in chemical, food, brewing, pharmaceutical, electroplating, paper making, environmental protection, water treatment and other departments to transport corrosive liquids such as acids, alkalis and salts.



适用介质:

Medium
各种粘度的液体,特别是粘稠难输送的介质。
各种浓度的液体及经过分离脱水的干物料。
含有固体颗粒、纤维、悬浮物的液体。
液体、气体、固体的混合物。
不能受搅动、剪切、掠夺的敏感性液体。
腐蚀性液体。

Various viscosity liquids, especially those that are difficult to transport.

Various concentrations of liquids and dry materials that have been separated and dewatered.

Liquid containing solid particles, fibers, suspensions.

Mixtures of liquids, gases, and solids.

Sensitive liquids that cannot be stirred, sheared, or plundered.

Corrosive liquids.


主要优点:

Advantage
耐磨
耐高温
使用寿命长
不老化
耐腐
拆卸检修方便
运转平稳
机械强度高
密封性能严格可靠
结构先进合理

Wear-resistant

High temperature resistance

long lasting

Not aging

Corrosion resistance

Demolition and easy maintenance

Smooth operation

High mechanical strength

Strict and reliable sealing performance



主要应用:

Application
制药
酿造
化工
食品
环保
电镀
造纸
水处理

Pharmaceutical

brewing

Chemical industry

food

Environmental protection

plating

papermaking

Water treatment



主要特点:
流量、压力稳定,无脉动。
变转速即可改变输出流量,可用作计量投加。
吸入能力强,工作噪声小,无泄漏,无温升。
适应范围广,可输送一切流动介质甚至非流动物料。
具有特殊螺旋面型腔的弹性定子与具有大导程大齿高的转子相啮合,在定子型腔内构成连续的密封线将吸入腔与压出腔分隔,转子转动时型腔连续地向排出方向运动,使物料不断地被抽吸与排出。

Flow, pressure stable, no pulse.

Changing the speed can change the output flow and can be used as a metering input.

Strong suction ability, low working noise, no leakage, no temperature rise.

Wide adaptability, it can transport all flowing media and even non-flowing materials.

The elastic stator with special helical cavity is meshed with the rotor with large lead and high tooth height. It forms a continuous seal line in the stator cavity to separate the suction chamber from the pressure chamber. When the rotor rotates, the cavity is continuously discharged. The direction of movement, so that the material is constantly being pumped and discharged.


KAYSEN的技术团队

Technical team

对几乎所有品牌和类型的泵进行快速有效的维护,修理和检修。

泵是您生产过程中不可缺少的元素。故障泵经常会导致生产能力下降甚至生产停机。凯森是几乎所有品牌和类型的泵快速和有效的维修,维修和大修的合作伙伴。多亏了凯森的机器诊断服务,您可以防止由于无法预料的机器停机而造成的生产中断。凯森还提供24小时的紧急泵问题的支持。我们提供量身定制的解决方案以满足您的所有需求。

有效和定期的维护对于泵的*运行至关重要。预防性维护有助于确保您不会面临突发的生产停机和相关费用。我们执行机器诊断服务来精确确定您的泵的状况。

Quick and efficient maintenance, repair and overhaul of almost all brands and types of pumps.

Pumps are an indispensable element of your production process. Faulty pumps often result in reduced production capacity or even production downtime. Kason is a fast and efficient maintenance, repair and overhaul partner for almost all brands and types of pumps. Thanks to Kayson's machine diagnostics service, you can prevent production interruptions due to unforeseen machine downtime. Kaysen also provides 24-hour emergency pump support. We provide tailor-made solutions to meet all your needs.

Effective and regular maintenance is critical to the optimal operation of the pump. Preventive maintenance helps to ensure that you do not face sudden production downtime and related expenses. We perform machine diagnostic services to accurately determine the condition of your pump.


   位于Schw?bischGmünd的凯森Kaysen泵业有限公司是*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。
       凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
         Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

塑料泵()品牌