|用途: 水、油漆、污水、化工液体等等||型号: KAYSEN||工作压差:|
|制造商:||压力环境: 常压||介质温度: 250℃|
|驱动方式: 气动||适用介质: 水||是否进口:|
The pneumatic diaphragm pump is a new type of conveying machine, which is a relatively new type of pump in the industry. Compressed air is used as the power source. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. At present, serial production has been formed, with a total of eight specifications diameter: φ10mm (3/8''), φ15mm (1/2''), φ25mm (1''), φ40mm (11/2''), φ50mm (2 ''), φ65mm (21/2''), φ80mm (3''), φ100mm (4''). Four materials: aluminum alloy, cast iron, stainless steel, engineering plastics. The diaphragm pump uses nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene diaphragm according to different liquid media. To meet the needs of different users.
●The pump has no rotating parts and will not cause environmental pollution and personal safety.
●It is not necessary to use electricity, and it is safe and reliable to use in flammable and explosive places.
● It can transport a relatively viscous liquid. (viscosity below 10,000 centipoise)
●The pump does not need to be lubricated with oil. Even if it is idling, it has no effect on the pump. This is a major feature of the pump.
●The pneumatic diaphragm pump can pump both flowing liquid and some non-flowing medium. It has many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump.
● No need to irrigate water, the suction stroke is up to 7m, the lift is up to 50m, and the outlet pressure is not less than 6kgf per square centimeter.
●Flowable cover, good performance, allowing the passage of the largest particles. When pumping mud and impurities up to 10mm in diameter, the pump wear is minimal.
●The head and flow can be adjusted steplessly through the valve opening. (Pneumatic pressure is adjusted at 2-8kg/cm 2 )
Germany Kaysen imported pneumatic diaphragm pump overview
The pneumatic diaphragm pump is currently the most innovative type of pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. For various corrosive liquids, liquid with particles, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastics and stainless steel. NBR, neoprene, fluororubber, and polytetrafluoroethylene are used according to different liquid media. To meet the needs of different users.
The pneumatic diaphragm pump does not need to be irrigated, the suction stroke is up to 5m, the product lift can reach 70 meters, the outlet pressure is ≥7kgf/cm2; the flow is spacious, the pass performance is good, and the maximum particle diameter is allowed to reach 10mm. When the mud and impurities are pumped, the pump wears little; the lift and flow can be adjusted steplessly by the valve opening (the air pressure is adjusted between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium does not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and harm to personal safety; it does not need electricity, it is safe and reliable to use in flammable and explosive places; it can be submerged in the medium;
Easy to use, reliable in operation, easy to open and close, only need to open and close the gas valve, even if there is no medium running or sudden stop due to unexpected circumstances, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will not be overloaded. Automatic stop, self-protection performance, when the load returns to normal, there is automatic start-up operation; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the medium conveyed by the pump will not be in contact Valves, linkages and other moving parts, unlike other types of pumps, the performance of the rotor, pistons, gears, blades and other components wear down gradually; can transport a more viscous liquid (viscosity below 10,000 centipoise); The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pneumatic stainless steel diaphragm pump.
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.