|外型尺寸:||品牌: KAYSEN||货号: KS5987563|
|用途: 化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。||型号: KAYSEN||工作压差: 0|
|制造商:||压力环境: 常压||介质温度: 250℃|
|驱动方式: 气动||适用介质: 水||是否进口:|
GERMANY KAYSEN PUMP CO .,LTD
Cast steel pneumatic diaphragm pump is a new generation of pneumatic diaphragm pump developed by Kaiser, Germany. It has reliable quality and long service life. It can pump liquid and transport some non-flowing medium. It has self-priming pump, submersible pump and shield pump. Many advantages of conveying machinery such as mud pumps and impurity pumps.
● No need to irrigate water, suction up to 5 meters, lift up to 70 meters, outlet pressure ≧ 7bar
●The pump has no rotating parts, no shaft seal, and the medium pumped by the diaphragm is completely separated from the moving parts of the pump and the workpiece medium, and the medium to be transported will not leak outward. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety.
●No need to use electricity, safe and reliable in flammable and explosive places
●The flow is spacious and the pass performance is good, allowing the maximum particle diameter to reach 10 mm. When pumping mud and impurities, the pump wears little
●The head and flow can be adjusted steplessly by the opening of the valve (the air pressure is adjusted between 1-7bar)
●It can transport relatively sticky liquid (viscosity below 10,000 centipoise)
●The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump.
● can be submerged in the medium to work
●Easy to use, reliable in operation, easy to open and close the gas valve, even if there is no medium running or sudden shutdown due to unexpected conditions, the pump will not be damaged. Once overloaded, the pump will automatically stop. Self-protection, when the load returns to normal, it can automatically start running
●The medium conveyed by the pump will not touch the moving parts such as the valve, the connecting rod, etc., unlike other types of pumps, the performance of the rotor, piston, gear, blade and other parts will be gradually reduced.
The main advantage
●Long service life
● Easy to use
● low noise
● will not pause
●Simple structure and less wearing parts
● Easy installation and maintenance
● safe and reliable
●Adhesives and glues, all kinds can be pumped
●Plastic pneumatic diaphragm pump can be used to absorb paint, gum, pigment
● After drilling the oil well, pump the sediment and grout with a pneumatic diaphragm
●All kinds of tiles, porcelain, bricks and pottery glaze
●Suck all kinds of sewage
●Pneumatic diaphragm pump can be used for tanker and barge clearance to absorb sewage in warehouse
●Aspirate various emulsions and fillers
● water in mines, tunnels, tunnels, beneficiation, slag, pumping cement grouting and mortar
●Suck hops and fermented powder slurry, syrup, sugar secret
●Pneumatic diaphragm pump can absorb all kinds of abrasives, corrosives, oil and mud, cleaning grease and general containers
●The diaphragm pump pumps all kinds of rubber slurry
●All kinds of strong acid, strong alkali, strong corrosive liquid
● Can absorb a variety of highly toxic, flammable, volatile liquids
●Pneumatic diaphragm pump as a pre-stage pressure transmitter for various solid-liquid separation equipment
●Aspirate various high temperature liquids up to 150 degrees
●Pneumatic diaphragm pump can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate, etc.
Cast steel pneumatic diaphragm pump
Stainless steel pneumatic diaphragm pump
Fluoroplastic pneumatic diaphragm pump
Pneumatic powder pump
Sanitary diaphragm pump
位于Schw?bischGmünd的德国凯森Kaysen泵业有限公司是 *的各种流体水泵和隔膜泵制造商之一。60多年来，凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合，我们支持 各地的客户成功掌握供水，采矿，工业，化工，造纸，电力，食品，制药，污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商，我们是液体需要安全，高效和经济运输的*合作伙伴。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.