GERMANY KAYSEN PUMP CO .,LTD
The aluminum alloy pneumatic diaphragm pump is a new type of diaphragm pump made of aluminum alloy, which can pump the flowing liquid and transport some non-flowable medium. It has self-priming pump, submersible pump, shield pump, mud pump and impurity pump. Many advantages of conveyor machinery.
● can be submerged in the medium to work;
●The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump;
● No need to irrigate water, the suction stroke is up to 5 meters, the lift is up to 70 meters, and the outlet pressure is bar7bar;
● can transport a more viscous liquid (viscosity below 10,000 centipoise);
●It is not necessary to use electricity, and it is safe and reliable to use in flammable and explosive places;
●The flow is spacious and the pass performance is good, allowing the maximum particle diameter to reach 10 mm. When pumping mud and impurities, the pump wears little;
●The head and flow can be adjusted steplessly by the opening of the valve (the air pressure is adjusted between 1-7bar);
●The pump has no rotating parts, no shaft seal, and the medium pumped by the diaphragm is completely separated from the moving parts of the pump and the workpiece medium, and the medium to be transported will not leak outward. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety;
●Easy to use, reliable in operation, easy to open and close the gas valve, even if there is no medium running or sudden shutdown due to unexpected conditions, the pump will not be damaged. Once overloaded, the pump will automatically stop. Self-protection performance, when the load returns to normal, it can automatically start running;
●The structure is simple and the wearing parts are few. The pump has a simple structure, convenient installation and maintenance. The medium conveyed by the pump will not touch the moving parts such as the valve, the connecting rod, etc., unlike other types of pumps due to the rotor, piston, gear, The wear of the blades and other components causes the performance to gradually decrease;
The main advantage:
● low noise
● will not pause
●It can withstand up to 150 degrees of high temperature liquid.
●Stainless steel pneumatic diaphragm pump can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
●Stainless steel pneumatic diaphragm pump can be used to absorb paint, gum and pigment.
●Stainless steel pneumatic diaphragm pump is used as the front stage pressure supply device for various solid liquid separation equipment.
●Adhesives and glues, all types can be pumped.
●All kinds of tiles, porcelain, bricks and pottery glaze.
● A variety of strong acids, strong alkalis, strong corrosive liquids.
● After drilling the oil well, pump the sediment and grout with a pneumatic diaphragm.
● Aspirate various emulsions and fillers.
● Suction all kinds of sewage.
● Can absorb a variety of highly toxic, flammable, volatile liquids.
●Pneumatic diaphragm pump can be used to pick up the sewage in the tank for the tanker and barge clearance.
●Suck hops and fermented powder slurry, syrup and sugar.
● Water in mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.
●Stainless steel diaphragm pump pumps all kinds of rubber slurry.
●Stainless steel pneumatic diaphragm pump can absorb all kinds of abrasives, corrosives, oil and mud, cleaning grease and general containers.
Cast steel pneumatic diaphragm pump
Stainless steel pneumatic diaphragm pump
Fluoroplastic pneumatic diaphragm pump
Pneumatic powder pump
Sanitary diaphragm pump
位于Schw?bischGmünd的德国凯森Kaysen泵业有限公司是 *的各种流体水泵和隔膜泵制造商之一。60多年来，凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合，我们支持 各地的客户成功掌握供水，采矿，工业，化工，造纸，电力，食品，制药，污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商，我们是液体需要安全，高效和经济运输的*合作伙伴。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.