进口不锈钢电动隔膜泵-进口电动隔膜泵-德国KAYSEN泵业

进口不锈钢电动隔膜泵德国KAYSEN进口电动隔膜泵

GERMANY KAYSEN PUMP CO .,LTD

不锈钢电动隔膜泵是一种新型的泵类，近年来、由于在隔膜材质上取得了突破性的进展，国际上越来越多的工业化国家采用此种型式的泵，取代部份离心泵、螺杆泵来应用于石化、陶瓷、冶金等行业。

主要特点：

●不需灌引水，自吸能力达7米以上

●通过性能好，直径在10毫米以下的颗粒、泥浆等均可以毫不费力地通过

●由于隔膜将被输送介质和传动机械件分开，所以介质*不会向外泄漏。且泵本身无轴封，使用寿命大大延长。根据不同介质，隔膜分为氯丁橡胶、氟橡胶、丁晴橡胶等，完全可以满足不同用户的要求

●体积小重量轻：由于采用了行星摆线传动结构，故使泵型获得小尺寸如与同类型泵来比较，其体积重量均下降一半左右

●泵体介质流经部份，可根据用户要求，分为铸铁、不锈钢、衬胶、电机分为普通式和防爆式(B3d)两种，目前该泵正应用在下列场合

主要优点：
●结构紧凑、体积小、重量轻、装拆方便

●传动效率高

●运转平稳、噪音低

●使用寿命长

●可无泄漏输送介质

●可承受空载运行

●不需灌引水，能自通过性能好，大颗粒杂质、泥浆等均可毫不费力地通过

●根据不同介质，隔膜分为氯丁橡胶、氟橡胶、*橡胶、四氟乙烯，完全可以满足不同用户的需要。过流部件也可根据用户要求，分为铁、不锈钢、铝合金，电机分为普通型和防爆型

主要应用：

●各种剧毒、易燃、易挥发液体。

●各种瓷器釉浆水泥灌浆灰浆泥浆。

●各种强酸、强碱、强腐蚀液体。

●各种橡胶浆乳胶、有机溶剂、填料。

●可输送较高温度的介质150℃。

●用泵为油轮驳船清仓吸取仓内污水及剩为作各种压滤机前级送压装置。

●热水回收及循环。

●啤酒花及发酵粉稀浆、糖浆、糖密。

●油罐车、油库、油品装卸。

●泵吸矿井、坑道、隧道、下水道中

●泵吸泡菜、果酱、土豆泥、巧克力等。 污水、沉淀物。

●泵吸油漆、树胶、颜料粘合剂。

●各种特殊介质的吸送。

Stainless steel electric diaphragm pump is a new type of pump. In recent years, due to the breakthrough in diaphragm material, more and more industrialized countries in the world use this type of pump to replace some centrifugal pumps and screw pumps. Used in petrochemical, ceramic, metallurgical and other industries.

main feature:

● No need to irrigate water, self-priming capacity of more than 7 meters

●With good performance, particles, mud, etc. with diameters below 10 mm can pass without difficulty

● Since the diaphragm will be separated by the conveying medium and the transmission mechanism, the medium will never leak out. Moreover, the pump itself has no shaft seal and the service life is greatly extended. According to different media, the diaphragm is divided into neoprene, fluororubber, nitrile rubber, etc., which can fully meet the requirements of different users.

●Small size and light weight: Due to the planetary cycloidal transmission structure, the pump type can be obtained in a small size, such as compared with the same type of pump, its volume and weight are reduced by about half.

●The pump medium flows through the part, which can be divided into cast iron, stainless steel, rubber lined, motor divided into ordinary type and explosion-proof type (B3d) according to user requirements. At present, the pump is being used in the following occasions.

The main advantage:

●Compact structure, small size, light weight, convenient assembly and disassembly

●High transmission efficiency

● Smooth operation and low noise

●Long service life

●No leakage transport medium

● can withstand no-load operation

●It does not need to be irrigated, it can pass the performance well, and the large particles of impurities, mud, etc. can pass without any effort.

● According to different media, the separator is divided into neoprene, fluororubber, nitrile rubber and tetrafluoroethylene, which can meet the needs of different users. The flow-through parts can also be divided into iron, stainless steel and aluminum alloy according to user requirements. The motor is divided into normal type and explosion-proof type.

main application:

● A variety of highly toxic, flammable, volatile liquids.

●All kinds of porcelain glaze cement grouting mortar.

● A variety of strong acids, strong alkalis, strong corrosive liquids.

●All kinds of rubber latex, organic solvent and filler.

● It can transport 150°C medium with higher temperature.

● Use the pump to clear the tanker for the oil tanker and take the pre-stage pressure supply device for various filter presses.

● Hot water recovery and recycling.

● Hops and baking powder slurry, syrup, sugar dense.

● Tank truck, oil depot, oil loading and unloading.

● pumping mines, tunnels, tunnels, sewers

● Pump soak pickles, jams, mashed potatoes, chocolate, etc. Sewage, sediment.

● Pump paint, gum, pigment binder.

● Suction of various special media.

Stainless steel electric diaphragm pump

Fluoroplastic electric diaphragm pump

Miniature electric diaphragm pump

位于Schw?bischGmünd的凯森Kaysen泵业有限公司是 *的各种流体水泵和隔膜泵制造商之一。60多年来，凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合，我们支持 各地的客户成功掌握供水，采矿，工业，化工，造纸，电力，食品，制药，污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商，我们是液体需要安全，高效和经济运输的*合作伙伴。

凯森始终坚持“重质量，讲信誉”为宗旨。产品现 全国各地，并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业，深得用户的信赖和广泛的赞誉。

The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

进口不锈钢电动隔膜泵德国KAYSEN进口电动隔膜泵