进口水环式真空泵-进口真空泵-德国KAYSEN泵业
| 货号 | KS981059 |
|---|---|
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。 |
| 型号 | KAYSEN |
| 工作压差 | 0 |
| 压力环境 | 常压 |
| 介质温度 | 250℃ |
| 驱动方式 | 电动 |
| 适用介质 | 水 |
水环式真空泵-真空泵-KAYSEN泵业
GERMANY KAYSEN PUMP CO .,LTD
水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃*工作压力(压力+泵送压力)：1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质。
一.水循环真空泵原理
水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃*工作压力(压力+泵送压力)：1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质：清水或物理化学性质类似清水的其他液体密封水管部件：压力≥0.03 Mpa 时不安装 结构设计：单级双吸轴向中开涡壳离心泵,卧式安装,驱动机(电动机或内燃机)可根据需要设置在泵的左侧或右侧(即面向出口,驱动机在左侧为逆时针旋转。
主要特点：
●节水效果明显。
由于采用水循环作业，加入水箱内的水可循环使用，克服了那种用直接冲放自来水方法获取真空时大量浪费水的现象。经实测，以一个工作日连续作业计算，在达到同样真空度的条件下，使用本产品可节水10吨以上，而且，一次加水，可长期使用，这在水源缺乏或水压不足的实验室尤其适用。
●多功能综合作用。
本机除可以提供真空条件外，还可同时进行外循环作业，为反应装置提供循环冷却水。本机与自来水源连接，通过适量补充注水源，可以在较长时间连续作业情况下，保持真空循环水温度和水质不变，既可确保真空度下降，又能实现循环冷却水的供应。
●造型新颖，使用方便。
本机安装了两个抽气嘴，可单独或同时抽气作业。每个抽气嘴各装一个真空表，可以方便地观察真空度，抽气管路上装有止回阀，可防止抽真空作业意外停机时，循环水回流到被抽真空的设备中去。耐腐蚀、无污染。本机水泵部件采用不锈钢，不受酸碱等腐蚀物的影响;同时不产生任何污染实验室的油污、杂质等。
主要优点：
●体积小
●重量轻
●移动方便
●高度较低
●操作方便
●耐腐蚀
Water ring vacuum pump
Water ring vacuum pump
Liquid ring vacuum pump
Water circulation vacuum pump high temperature ≤100 °C, special configuration up to 150 °C, ambient temperature generally ≤40 °C maximum working pressure (inlet pressure + pumping pressure): 1.0 MPa (Hsp ≤ 75 m) or 1.6 MPa (Hsp > 75 m) special configuration The medium can be transported up to 1.6 MPa or 2.5 MPa, respectively.
1. Principle of water circulation vacuum pump
Water circulation vacuum pump high temperature ≤100 °C, special configuration up to 150 °C, ambient temperature generally ≤40 °C maximum working pressure (inlet pressure + pumping pressure): 1.0 MPa (Hsp ≤ 75 m) or 1.6 MPa (Hsp > 75 m) special configuration It can be transported to 1.6MPa or 2.5Mpa respectively: other liquid sealed water pipe parts with clear water or physical and chemical properties similar to clean water: no installation structure design when inlet pressure ≥0.03 Mpa: single-stage double-suction axial open-core volute centrifugal pump, For horizontal installation, the drive unit (motor or internal combustion engine) can be placed on the left or right side of the pump as needed (ie facing the outlet, the drive is rotated counterclockwise on the left side).
main feature:
● The water saving effect is obvious.
Due to the water circulation operation, the water added to the water tank can be recycled, which overcomes the phenomenon that a large amount of water is wasted when the vacuum is directly extracted by tapping the tap water. According to the actual measurement, the continuous operation of one working day can save more than 10 tons of water under the condition of the same vacuum. Moreover, the water can be used for a long time in one time. This is in the laboratory with lack of water or insufficient water pressure. Especially suitable.
● Multi-functional comprehensive function.
In addition to providing vacuum conditions, the machine can also perform external circulation operations at the same time to provide circulating cooling water to the reaction unit. The machine is connected with the tap water source. By properly replenishing the water source, the vacuum circulating water temperature and water quality can be kept constant under continuous operation for a long time, which can ensure the vacuum degree is reduced and the circulating cooling water can be supplied.
●The style is novel and easy to use.
This machine is equipped with two suction nozzles, which can be pumped separately or simultaneously. Each vacuum nozzle is equipped with a vacuum gauge, which can conveniently observe the vacuum degree. The suction pipeline is equipped with a check valve to prevent the circulating water from flowing back into the vacuumed equipment when the vacuuming operation is stopped unexpectedly. Corrosion-resistant, non-polluting. The pump parts of the machine are made of stainless steel, which is not affected by corrosive substances such as acid and alkali; at the same time, it does not produce any oil pollution and impurities that pollute the laboratory.
The main advantage:
● small size
●Light weight
● Easy to move
●Low height
● Easy to operate
● corrosion resistance
位于Schw?bischGmünd的凯森Kaysen泵业有限公司是世界*的各种流体水泵和隔膜泵制造商之一。60多年来，凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合，我们支持世界各地的客户成功掌握供水，采矿，工业，化工，造纸，电力，食品，制药，污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商，我们是液体需要安全，高效和经济运输的*合作伙伴。
凯森始终坚持“重质量，讲信誉”为宗旨。产品现畅销全国各地，并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业，深得用户的信赖和广泛的赞誉。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
