营派阀门(上海)有限公司
MENU Close 公司首页 公司介绍 公司动态 证书荣誉 联系方式 在线留言
产品展厅
进口框式搅拌机-进口搅拌机-德国KAYSEN泵业
  • 品牌:KAYSEN
  • 货号:KS561059
  • 发布日期: 2019-10-12
  • 更新日期: 2024-12-03
产品详请
外型尺寸
品牌 KAYSEN
货号 KS561059
用途 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。
型号 KAYSEN
工作压差 0
制造商
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质
是否进口

进口框式搅拌机 德国KAYSEN搅拌机

GERMANY KAYSEN PUMP CO .,LTD

进口框式潜水搅拌机可视为桨式搅拌器的变形,其结构比较坚固,搅动物料量大。框式搅拌器与容器壁间隙较小,有利于传热过程的进行,常用于传热、晶析操作和高粘度液体、高浓度淤浆和沉降性淤浆的搅拌。
JBK型框式搅拌器直径较大,一般取反应器内径的2/3~9/10,50~70r/min。快速旋转时,搅拌器叶片所带动的液体把静止层从反应容器壁上带下来;慢速旋转时,有刮板的搅拌器能产生良好的热传导。
JBK型框式搅拌器一般使用于粥状物料的搅拌,搅拌转数以60-130r/min为宜,适用的*黏度为200~300Pa·s。


主要特点:

搅拌机桨叶采用框式搅拌形式,其动力效率高。根据池型及搅拌工艺要求可采用单层、双层或多层桨叶,可使搅拌介质同时产生径向和环向流动,可在要求的混合时间内达到一定的搅拌强度,满足混合速度快、均匀、充分等要求,且水力损失小,并可广泛适应搅拌介质比重、浓度、酸碱度、温度及粘度的变化,以满足各种搅拌工况的要求。
驱动装置主轴通过联轴器与搅拌轴联接,搅拌轴间均采用法兰联接形式联接,搅拌轴由双列角接触推力球轴承和滑动轴承支承,具有足够的强度和刚度,并具有较高的稳定性。滑动轴承由油室内的润滑脂润滑,可确保设备长期安全可靠地运行。
传动环节少,机械效率高,结构紧凑,运行平稳;
占地面积小,处理量大,能耗低。安装、运行、维护费用低;


主要应用:
JBK型框式搅拌机可在要求的混合时间内达到一定的搅拌强度,满足混合速度快、均匀、充分等要求,且水头损失小,并可适应水量的变化以适用于各种水量的水厂用于给水排水处理反应过程中的各种水处理药剂的溶解或原水与混凝剂的混合、反应及池或容器内不同比重的有机或无机液体的液相搅拌混合。

Hyperbolic mixer

Frame mixer

Paddle mixer

The JBK frame type submersible mixer can be regarded as the deformation of the paddle agitator, and its structure is relatively strong, and the amount of animal material is large. The gap between the frame stirrer and the container wall is small, which is beneficial to the heat transfer process, and is often used for heat transfer, crystallization operation and stirring of high viscosity liquid, high concentration slurry and sedimentation slurry.

The JBK frame stirrer has a large diameter, generally taking 2/3 to 9/10, 50 to 70 r/min of the inner diameter of the reactor. During rapid rotation, the liquid driven by the agitator blades brings the stationary layer away from the reaction vessel wall; when rotating slowly, the scraper stirrer produces good heat transfer.

JBK frame stirrer is generally used for the stirring of porridge materials. The stirring speed is preferably 60-130r/min, and the highest viscosity is 200-300Pa·s.



main feature:


●The mixer blade adopts the frame type stirring mode, which has high power efficiency. According to the pool type and mixing process requirements, single-layer, double-layer or multi-layer blades can be used to make the stirring medium produce radial and circumferential flow at the same time, which can reach a certain stirring intensity within the required mixing time, and meet the fast mixing speed. Uniform, sufficient and other requirements, and small hydraulic loss, and can be widely adapted to the changes in specific gravity, concentration, pH, temperature and viscosity of the stirring medium to meet the requirements of various mixing conditions.

●The main shaft of the drive unit is connected to the stirring shaft through the coupling. The mixing shafts are connected by flange connection. The stirring shaft is supported by double row angular contact thrust ball bearings and sliding bearings, which has sufficient strength and rigidity and high. Stability. The plain bearings are lubricated by grease in the oil chamber to ensure long-term safe and reliable operation.

●Less transmission links, high mechanical efficiency, compact structure and stable operation;

● Small footprint, large processing capacity and low energy consumption. Low installation, operation and maintenance costs;




main application:

JBK frame mixer can reach a certain mixing intensity within the required mixing time, meet the requirements of fast, uniform and sufficient mixing speed, and has small head loss, and can adapt to the change of water quantity for water plants with various water quantities. The dissolution of various water treatment chemicals during the water supply and drainage treatment reaction or the mixing and reaction of the raw water and the coagulant, and the liquid phase stirring of the organic or inorganic liquid of different specific gravity in the tank or the vessel.

位于Schw?bischGmünd的凯森Kaysen泵业有限公司是 *的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持 各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。

凯森始终坚持“重质量,讲信誉”为宗旨。产品现 全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.

进口框式搅拌机 德国KAYSEN搅拌机

联系方式
手机:15800827238