进口加药搅拌机-进口搅拌机-德国KAYSEN泵业

进口加药搅拌机-进口搅拌机-德国KAYSEN泵业

产品介绍:

加药搅拌机-搅拌机-KAYSEN泵业GERMANY KAYSEN PUMP CO .,LTD加药搅拌机装置,在水处理工程中加药箱主要用于各种药剂的搅拌、溶解、储存,再通过计量泵或水射器将药液投加到各投加点。加药箱外形分为方形和圆形,材质...


  • 物品单位:
  • 品牌: 德国KAYSEN
  • 货号: KS561059

产品详细说明

货号 KS561059
品牌 KAYSEN
用途 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。
型号 KAYSEN
工作压差 0
压力环境 常压
介质温度 250℃
驱动方式 电动
适用介质

加药搅拌机-搅拌机-KAYSEN泵业

GERMANY KAYSEN PUMP CO .,LTD

加药搅拌机装置,在水处理工程中加药箱主要用于各种药剂的搅拌、溶解、储存,再通过计量泵或水射器将药液投加到各投加点。加药箱外形分为方形和圆形,材质为聚乙烯(PE),通过滚塑技术一次成型,上部预设了计量泵及搅拌机的安装位置,搅拌机、加药箱、计量泵三合一,使用非常方便。

主要特点:

高速比和高效率

单级传动,就能达到 1:87的减速比,效率90%以上,如果采用多级传动,减速比更大。

结构紧凑体积小

由于采用了行星传动原理,输入轴与输出轴在同一心线上,使其机型获得尽可能小的尺寸。

运动平稳噪声低

摆线针齿 啮合齿数较多,重叠系数大以及具有机件

平衡的机理,使振动和噪声限制在最小程度。

使用可靠、寿命长

因主要零件采用高碳铬钢材料,经淬火处理,获得高强度,并且部分传动接触采用了滚动摩擦,所以经久耐用寿命长。

设计合理、维修方便

容易分解安装,最少零件个数以及简单的润滑,使摆线轮减速机深受用户的信赖。

 

主要应用:

主要应用在水处理中药剂制备,中和反应池悬浊液混合,石灰浆、活性炭、其他聚合物的混合搅拌。


加药搅拌机搅拌注意事项:
搅拌器需有正确的安装和使用才能保证安全长周期的稳定运行。

安装人员应有相应的资质和熟悉机械设备安装知识的人员来进行安装工作。

搅拌器需垂直安装,垂直度偏差应不大于5度。

搅拌系统严禁搅拌固体和粘度大的液体。

电机和轴承温度不能在超过75℃情况下运行。

电机和轴承及变速箱不能在缺润滑油情况下运行。

搅拌器轴和叶片不能在弯曲或变形情况下运行。如发现轴有弯曲现象或叶片有变形现象则应立即停机进行处理或更换。


Hyperbolic mixer

Frame mixer

Paddle mixer


Imported dosing mixer device, in the water treatment project, the dosing box is mainly used for stirring, dissolving and storing various chemicals, and then the drug solution is added to each feeding point through a metering pump or a water ejector. The shape of the dosing box is divided into square and round. The material is made of polyethylene (PE). It is formed by rotomolding technology. The upper part presets the installation position of the metering pump and the mixer. The mixer, the dosing box and the metering pump are three-in-one. Very convenient to use.



main feature:


●High speed ratio and high efficiency


Single-stage transmission can achieve a reduction ratio of 1:87 with an efficiency of more than 90%. If multi-stage transmission is used, the reduction ratio is larger.


● Compact structure and small size


Thanks to the planetary transmission principle, the input shaft and the output shaft are on the same core, making the model as small as possible.


●Slow motion and low noise


Cycloidal pin teeth have a large number of meshing teeth, large overlap factor and mechanical parts


The mechanism of balance keeps vibration and noise to a minimum.


●Reliable use and long life


Because the main parts are made of high-carbon chrome steel, they are quenched to obtain high strength, and some of the transmission contacts use rolling friction, so the durability is long.


● Reasonable design and convenient maintenance


Easy to disassemble and install, the minimum number of parts and simple lubrication make the cycloid reducer deeply trusted by users.


 


main application:


Mainly used in the preparation of water treatment, neutralization of the reaction tank suspension mixing, mixing of lime slurry, activated carbon, other polymers.



Imported dosing mixer mixing notes:

● The agitator needs to be properly installed and used to ensure stable operation for a long period of safety.


● The installer should have the appropriate qualifications and personnel familiar with the installation of mechanical equipment to carry out the installation work.


● The stirrer should be installed vertically, and the deviation of verticality should be no more than 5 degrees.


● Stirring system is strictly prohibited to stir solid and viscous liquid.


● Motor and bearing temperatures cannot be operated above 75 °C.


● Motors and bearings and gearboxes cannot be operated without lubricant.


? The agitator shaft and blades cannot be operated under bending or deformation. If the shaft is found to be bent or the blade is deformed, stop it immediately for disposal or replacement.

       位于Schw?bischGmünd的凯森Kaysen泵业有限公司是世界*的各种流体水泵和隔膜泵制造商之一。60多年来,凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合,我们支持世界各地的客户成功掌握供水,采矿,工业,化工,造纸,电力,食品,制药,污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商,我们是液体需要安全,高效和经济运输的*合作伙伴。

        凯森始终坚持“重质量,讲信誉”为宗旨。产品现畅销全国各地,并已逐步开发海外市场。公司多次被评为“重合同讲信用”企业,深得用户的信赖和广泛的赞誉。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.