|外型尺寸:||品牌: KAYSEN||货号: KS561059|
|用途: 抽水、化工、制药、石油、冶金、染料、冶炼、电力、电镀、农药、造纸、食品、纺织等行业酸洗工艺、制酸制碱、喷漆工艺、有色金属冶炼中的电解液输送、离子膜项目中的氯水输送、废水处理、电镀、农药领域。||型号: KAYSEN||工作压差: 0|
|制造商:||压力环境: 常压||介质温度: 250℃|
|驱动方式: 电动||适用介质: 水||是否进口:|
GERMANY KAYSEN PUMP CO .,LTD
The paddle mixer has the simplest structure. The blades are made of flat steel, welded or bolted to the hub. The number of blades is 2, 3 or 4 pieces. The blade form can be divided into two types: straight leaf and folded leaf. The shape characteristics of the blades can be divided into a flat paddle agitator and a pitch paddle agitator. The flat paddle agitator produces a radial force, the pitch paddle agitator produces an axial force, and the paddle agitator is suitable for low viscosity liquids, suspensions and solution agitation.
●The slurry mixer is an advanced and ideal machine at home and abroad. It has high automation, good mixing quality, high efficiency, low energy consumption, low noise, convenient operation, fast discharge speed, long service life of the liner and blade. The advantages of convenient maintenance and so on.
●The slurry mixer is suitable for the mixing of plastic, dry hard, lightweight aggregate concrete and various mortars and mortars.
●The mixing rod and the stirring blade have various materials such as stainless steel, carbon steel anti-corrosion and plastic;
●Easy to disassemble and install, the minimum number of parts and simple lubrication make the cycloidal reducer deeply trusted by users.
● It can reach a certain mixing intensity within the required mixing time, meet the requirements of fast, uniform and sufficient mixing speed, and has small head loss and can adapt to the change of water quantity. It is suitable for water plants with various water quantities.
The slurry mixer is suitable for the mixing of plastic, lime slurry, dry hard, lightweight aggregate concrete and various mortars and mortars.
Note on the use of paddle mixer:
● The mixer should be placed in a flat position, and the front and rear axles should be padded with square wood to keep the tires overhead, so as not to move around when starting.
● The mixer should be equipped with secondary leakage protection. After the power is turned on before going to work, it must be carefully inspected. It can only be used after passing the empty car test. During the test run, it should be checked whether the speed of the mixing drum is suitable. Under normal circumstances, the speed of the empty vehicle (after loading) is slightly faster than 2~3 turns. If there is a large difference, the ratio of the moving wheel to the transmission wheel should be adjusted.
● The direction of rotation of the mixing bowl should be in accordance with the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.
● Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, the surrounding is unobstructed and the lubrication of each part.
● After starting the machine, always pay attention to whether the components of the mixer are running normally. When shutting down, always check if the mixer blades are bent and the screws are knocked down or loose.
●When the concrete is agitated or it is expected to stop for more than 1h, in addition to the remaining material, the stone and water are poured into the barrel, turned on, and the mortar stuck on the barrel is washed out and completely discharged. There must be no water in the barrel to prevent the barrel and blades from rusting. At the same time, the ash accumulated outside the mixing drum should be cleaned to keep the machine clean and in good condition.
● After work and when the machine is not in use, the power should be cut off and the switch box should be locked to ensure safety.
位于Schw?bischGmünd的凯森Kaysen泵业有限公司是 *的各种流体水泵和隔膜泵制造商之一。60多年来，凯森以“制造”的可靠性和质量达到了*标准。凭借我们全面的产品组合，我们支持 各地的客户成功掌握供水，采矿，工业，化工，造纸，电力，食品，制药，污水和海上行业的苛刻抽水任务。作为上述领域创新技术的*供应商，我们是液体需要安全，高效和经济运输的*合作伙伴。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.