|用途: 水、温泉||型号: KAYSEN||工作压差:|
|压力环境: 常压||介质温度: 250℃||驱动方式: 电动|
"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
Imported pneumatic diaphragm pump——Shanghai distributor
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Components, systems, services and industry-specific solutions
Germany Kaysen imported submersible deep well pump overview:
1. The submersible deep well pump is centrifugal or mixed flow; it uses water-lubricated bearings; the connection to the motor uses a rigid coupling. The impeller of the deep well pump is driven by the motor to generate centrifugal force, which increases the energy of the liquid and conducts water extraction through the diversion effect of the pump casing. A check valve body is provided on the upper end of the water pump to prevent the working parts from being damaged by the backflow water in the water pipe when the electric pump is stopped. The valve has a drain hole, which can slowly drain the water in the pipeline to prevent the pipeline from freezing and cracking in winter. (Note: The low-lift submersible pump does not have a check valve body)
2. The motor of the submersible deep well pump is a closed water-filled wet structure. The stator winding of the motor adopts water-resistant polyethylene insulation and nylon sheathed multi-layer electromagnetic wires. Both guide bearing and thrust bearing are made of water lubricated material. The motor is filled with clean water to cool the motor and lubricate the bearings. The bottom of the motor is equipped with a pressure regulating film to adjust the expansion and contraction pressure difference of the clean water in the body caused by the temperature rise of the motor. The upper shaft of the motor is equipped with a sand control mechanism to prevent mud and sand from entering the body.
3. The pipeline part of the submersible deep well pump: it is used to connect the electric pump so that it is hoisted in the machine well and transports the water to the ground. It is mainly composed of short water pipe, water pipe, elbow, splint and other components. The short output pipe is the transitional part of the connection between the water pipeline and the electric pump. The elbow is installed at the wellhead to change the direction of water flow. The splint is used to hoist and fix the output pipeline during the installation of the deep well pump.
●High unit efficiency
●Safe and reliable operation
●The advantages of convenient installation and maintenance
It has the advantages of simple structure, high efficiency of the unit, low noise, safe and reliable operation, and convenient installation and maintenance. It is suitable for extraction from deep water wells, hot water wells and oceans, and can also be used to extract rivers, reservoirs, water channels, etc.;
It is mainly used for farmland irrigation and human and animal water in plateau mountains, and can also be used for water supply and drainage in cities, factories, railways, mines, and construction sites.
●Simple structure, saving raw materials.
●Motor and water pump body, submerged in water, safe and reliable.
●There are no special requirements for the well pipe, as long as the water pipe can bear the corresponding pressure.
●Easy to install and use and maintain, small footprint, no need to build pump room.
●Size: 6 inches-12 inches
●Flow rate: 5—600 cubic meters/hour
●Lift: 6-600 meters
●Power supply: voltage 380V+5%, frequency 50Hz+1% Hz, three-phase alternating current.
●Production standard: NEMA standard.
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.